As some may know by now, I have a Apple IIgs that I'm getting set up. I already have my 3400c connected to the internet, is there any way I can route the internet to the IIgs via …

Thanks, Wackymacs, but I tried that, too. I get the screen with the refresh button on the left and the arrow button on the right, but no drives appear (with a good OS9 install disk…

Thanks for the link, I'll check it out. I've seen you quite a few times on csa2 as well. UNIX on the Apple II is something that people have been talking about for over 20 years…

Your USB card should be one with the NEC controller chip on it. Then it will work in both Mac OS 9 (as USB1) and in Mac OS X (as both USB1 and USB2). I've heard, but not tested …

I had 4 hard drives in my Gigabit G4. As long as jumper settings are set. It works. Sure I had no optical drive, but it worked. Click to expand... That's nothing special. The R…

Power on the iMac, with a good known-working startup disc inserted, and hold Option. Wait, and a screen should appear showing the bootable options. When you can hear the hard drive…

I don't think that it does. I just read the manual last evening, and it looks like it's a bunch of BASIC scripts all tied together. It does have a task scheduler, though. Click …

I recently acquired an iMac G4 Flat Panel that will not boot. When turned on, you can hear the hard drive spin then stop, then the DVD combo drive spin and stop. I cannot get this …

I had 4 hard drives in my Gigabit G4. As long as jumper settings are set. It works. Sure I had no optical drive, but it worked. Click to expand... I think the point of this thr…

I had 4 hard drives in my Gigabit G4. As long as jumper settings are set. It works. Sure I had no optical drive, but it worked.

What is the difference with Rev 1 and 2 with respect to HDs? I have 2 Rev 2 units and both I think have a 1 single and 2 dual HD trays (for 5 total) plus the cdrom and zip drive ba…

I did that some time back. Used three 10gb drives raided. Wayne

The forum user Aoresteen had been also been able to do this in his Rev 1 B&W; he hasn't posted in a while though.

Yes, I've finally done it. I've had 2 drives running flawlessly in my 1st B&W G3 for many years now, so today I decided to try and get 3 running in my #2 G3. Specs are ve…

I think I will get the B&W. And a 450. (I remember I seen something about this, but can I pull the processor from a Yikes! and put on a B&W?) Click to expand... …

My 10.4 disk is kinda scratched so i will try and make an image from it and burn a fresh copy, try a brand new HDD and if i can a new DVD rom. Click to expand... Could also be …

Oh cool! Now does this just pretty much modify the NVRAM making it independent of the software once installed? Like i install it, turn it on, and i can swap out the hard drive with…

I'd try another IDE cable. Can you get the new HD to work off a single IDE chain on its own? JB Click to expand... I tried it piggy backed off the CD-ROM. I have tried a hand…

I'd try another IDE cable. Can you get the new HD to work off a single IDE chain on its own? JB

I did fresh install of OS 8.6, AppleShare, and Timbuktu. Disabled all of the unnecessary extensions. So far it's holding out. I still think I'll pop the hood and give it a once-ove…

I had no end of trouble with OS X 10.2.8 on my Beige G3, after a while it would just die. It then turned out it was going into power saver mode : , so I disabled that and it's b…

Oh cool! Now does this just pretty much modify the NVRAM making it independent of the software once installed? Like i install it, turn it on, and i can swap out the hard drive wit…

If you have say, a spare 6GB or something, install os x to that and then get OverDrive installed/turned on so you can then get drives bigger then 128GB in there. http://mac.profus…

I disabled unnecessary extensions, and now I can't even get to the finder... The CPU could be overheating. That is what was causing my Beige G3 to crash in between one and…

The CPU could be overheating. That is what was causing my Beige G3 to crash in between one and seven days for a year or two. If you have it overclocked, move the jumpers back to…