Yes, I have pressed interrupt and reset button at the same time many times but nothing changes.
So, a battery must be installed to avoid the "10 seconds" message and Mac going in …
Well I braved the tube today and got it straight. It's not 100% but it's better than it was. One question though, how much of a black bar should there be around the picture? I k…
68kMLATroubleshootingby tomlee59Fri, 19 Feb 2010 - 07:46
The backlight inverter in the Portable makes a high pitched whining sound when the backlight is on. Since converting mine to a solid state hard drive, that noise seems much louder…
The cable is correct---it has the joystick connector as well as the floppy connector. I have the floppy controller set up in slot 6, but when I tell the emulator to boot from slot …
68kMLATroubleshootingby mainlandFri, 19 Feb 2010 - 05:15
There are adjusters on the analog board for raster height, width, and H & V position. They are identified by icons & arrows which indicate which way they change the…
68kMLATroubleshootingby H3NRYFri, 19 Feb 2010 - 05:11
Great info!
It really highlights which apps are dual or even multi-thread aware as well as which apps/codecs are memory and/or io bound instead of cpu bound.
This is the kind of …
You know that might work.... I still have a few Proliant 5000 units. At least they are Compaq beige. They would fit right in at 7U in height, and once stripped are an incredible…
I'm assuming and hoping this is not a repack sealed box...
First does your cable have two ends on it? One with a little joystick icon, and one with a floppy disk?
If you have th…
68kMLATroubleshootingby ppuskariFri, 19 Feb 2010 - 04:32
Well I braved the tube today and got it straight. It's not 100% but it's better than it was. One question though, how much of a black bar should there be around the picture? I k…
68kMLATroubleshootingby TempestFri, 19 Feb 2010 - 03:11
Yes POST MORE PLEASE! GREAT STUFF!!
Just started listening and already Lens 2 makes me want to drag out Dungeons and Dragons and Immortal GS!!! Or at least the chord structure …
Also, just missed out on a Lombard that went for 21 pounds (I bid 20). I think it was a Lombard, I spent hours looking at pics and specs trying to find out.
http://cgi.ebay.co.uk/w…
Somebody from the old IRC channel has the 840AV version of a RAM card that used 8 x 72 pin SIMMs (32MB max each for 256MB total). I think Newer technology sold it. It was pretty fa…
68kMLASoftwareby Unknown_KFri, 19 Feb 2010 - 00:40
I have seen only one of these, on eBay a few years back. It sold for something outrageous even then, before the prices of nubus-era equipment began to go up.
As I recall, the writ…
68kMLASoftwareby beachycoveFri, 19 Feb 2010 - 00:23
I tried installing a 400mhz processor I pulled from a B&W G3 and it didn't work at all. (I assume the bus speeds are wildly different)
Click to expand...
B&W bu…
Daystar RAM PowerCard. I'm pretty sure it was not addressable as system memory, just as RAM disk, print spool, and disk cache.
FWIW I have been searching for this and any similar …
ok lets start again.I found a color classic on new zealands ebay trademe.co.nz
it would not boot..
so when it came i looked inside bad caps.
replace the caps and booted it up …
Thank you all for the replies. I'm a work now so I'll have to open it up later. The seller offered me a partial refund or to take it back entirely. You think I should hang onto it …
Could be, or a Pismo. If in doubt, ask them to turn it over and read the specs off the compliance sticker on the bottom.
Click to expand...
The thing is, I don't like to ask q…
Thank you all for the replies. I'm a work now so I'll have to open it up later. The seller offered me a partial refund or to take it back entirely. You think I should hang onto it …
68kMLAHardwareby SnickterPThu, 18 Feb 2010 - 21:56