Sorry, should have stated the G3 upgrade. Good to know though that it will work regardless while I hunt down online drivers. This shall be my next project.

The driver is required to activate the L2 cache. Otherwise, the CPU module will work fine. A G3 without cache is virtually the same thing as a 603e. I have that same processor u…

Driver for the hard drive or the G3 upgrade? I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. As for the G3 upgrade, I've…

Nice. But what we really need is a USENET gateway to 68kmla.org.

I spent quite a bit of time last night and this morning improving the Usenet post-indexing system. Before, it wasn't always grouping posts into their correct thread, and instead wa…

Ok, I took time today to look at that. I installed Airport Software 2.0.4 (I had 1.2 installed, that came with OS 9.2.2). Now it kinda works better: I can connect to my network us…

well I know the master slave jumpers are ok. the computer worker great for several weeks after the new hd. I reformateded and installed 10.4 clean and then ran tech tools to chec…

For shits and giggles, take the hard drive out and just boot from an os x disk, see what happens. Thats how I've figured out bad hard drives and such. Of course, a full size G4 to…

I should correct the above: this is a 802.11b card, not g.

Hadn't time to start up the Pismo last week. But I bet it'll will work with the latest Airport software, as said by freundling. I'll let you know!

I have: G3 desktop OS 9.2.2 (I'm struggling to get it to dual boot Ubuntu) 1000 MHz G3 (running from a 83 MHz FSB) 768 MB ram 80 GB hd 24x cd-rom ATI Radeon 9200 PCI 2-port…

Hi: Yes, the card I used works under Classic Mac, even with Apple's stock Airport software. It even does 128 bit encryption under OS 9.x.x How did I find it? I looked and resea…

I'd take it back to when you replaced the hard disk - did you set master/slave on the new drive? The fact that it's chiming, booting to a grey screen suggests all is good - so I'…

Oops, missed those last couple of sentences. The reason for asking was that I had a problem with a 2300c caused by overheating of a transformer on the logic board (one of those sq…

The best way to reset the pram is to disconnect main power, disconnect the PS from the motherboard, remove the pram battery, tap the power button to kill any residual voltage, and …

what is it with beige motherboards dying? / the symptoms were a non-booting OS X install, OS 9 booting fine. Click to expand... you THINK you cleared it with Command-Option-P-R a…

Does the Duo work on its own fine outside the Dock?

What? You found an 11b/11g card that works in OS 9? As far as I know, the Agere/Avaya/Lucent/Orinoco/WhoeverTheyAreToday chipset is 11b only. Apple moved to a Broadcom chipset f…

So, did you get it fixed? If so, what fixed it? Peace, Drew

Unfortunately, most of those you have listed are Google groups, not Usenet newsgroups. I found a 68k linux Usenet group, but it was full of spam. :O

The wifi card will work under OS X, and it is 802.11g - it's an OEM Orinoco, a generic version of Apple's Airport Card used in their laptops. I have also installed the wifi into a…

Hi, I've opened a public gate-way (read-only) to comp.sys.apple2 at my site. http://macgui.com/usenet/I will be adding more newsgroups shortly. Any suggestions? Click to expand.…

I'm not a fan of Matsushita drives. Apple's firmware is unnecessarily restrictive about what media types are supported, and Matsushita steadfastly abides by its agreement with Appl…

It's probably a nicer interface Click to expand... Certainly more lynx-friendly Click to expand... I don't know how long it will stay that way, since I'm working on integr…

I use FreeDOS for my DOS software like GEM.