So like you could make leopard run on a G3? Click to expand... well you can run Leopard on a G3 system that has a G4 upgrade on it, but its not the same as running it on a G3 t…

So like you could make leopard run on a G3?

Installed Mac OS X Leopard. So far i'm pleased with it, it's not a bad operating system on this CPU and Graphics Card. Speed isn't sacrificed too much for the functionality... it's…

I tried those drivers already, but they don't seem to work. ???

I still have the source file for the diagram (OmniGraffle Pro) so I'll make some minor changes later. May make up a wiring diagram for the mains power passthrough connector as well…

You will probably need to use a newer version of the Orinoco drivers with OS 8.6. Version 7.2 of the drivers is available here (at the bottom of the page): http://www.alksoft.com/p…

That guy's diagrams are pointlessly confusing. The one on outofspec is much clearer. But in the end it was someone in IRC who sent us the pinout from the Apple service manual who…

Check out the following: http://zots.ath.cx/atxg4/atxg4.html http://www.atxg4.com http://forums.macrumors.com/showthread.php?p=5245583 http://www.io.com/~trag/28v_vreg.pdf

I remade some of the wiring tonight to a much neater design. Still needs to be tied together but it's otherwise working fine. Used a 20 to 24 pin extension cable this time as well.…

Tom: Really? How does that work? :O And is it reliable? :O

And if it's one of the late models (LS-240), it has the interesting ability to squeeze 32MB onto an ordinary 1.44MB floppy disk.

I have an Imation USB floppy drive, for 1.44 MB disks, that I used on an iMac G3 with no problems. It will read, write, and format floppies in either Mac or PC 1.44 format and in …

The imation super disks read and write 1.44MB disks and their 120MB superdisks. Then USB ones have drivers for the Mac. I have a PCMCIA unit that is PC only, plus an internal drive…

Yep, after much headbanging on IRC with iMac600 and others, this was the conclusion we settled on. I have a box of 24V Powerbook supplies with dodgy cases I picked up at auction. …

That's where this next component comes in. Instead a connection of 5vSB, it will use a secondary internal 24v PSU from a PowerBook! The connections of the PowerBook PSU will be con…

Bunsen, I was using 5VSB of my Antec NeoPower 650 Blue for my Digital Audio mobo but eventually after time it started loosing power under extreme load and right after power button …

http://www.outofspec.com/frankenmac/wire.shtml Looking at the link you provided earlier, the two additional pins toward the top of the connector require at least 12v to start up- …

Why? Are you thinking of the +28V line? I had no problem substituting +5VSB (standby) Otherwise, a G4 requires a -lot- less power than a P4

Congratulations! a packet of self-adhesive RAM heatsinks to lob onto any suspiciously warm ICs Click to expand... the RAM itself is already 133mhz. Click to expan…

Congratulations! a packet of self-adhesive RAM heatsinks to lob onto any suspiciously warm ICs Click to expand... the RAM itself is already 133mhz. Click to expand…

Sat. 23rd August 2008 (5:25PM) - Quicksilver Roars into Life What? That's right. After spending a good $65 on a Gigabit Ethernet logic board, i've just gone and repaired my broke…

I see that the Gigabit and Digital Audio power pinouts are exactly the same. I succeeded in booting my DA from an ATX PS with an extension cable made for P4 logic boards. It had …

With that amount of RAM, 10.4 (Tiger) should be fine.

it is a lime 366 cd with usb and fire wire i have os 10.4 on cd and dvd both

Does it have USB ports and a DVD drive?