Weird Sawtooth G4 Performance Issues... — #4
Your Sawtooth uses a 66MHz PCI video card (if it has AGP, it's not a Sawtooth) which is markedly slower, regardless of the fact that the two chipsets are virtually identical (both …
Found 63,733 posts across 1 forum.
Weird Sawtooth G4 Performance Issues... — #3
Yes it's Leopard's fault all the way. My Dual 450MHz chokes with video in leopard. Tiger, works fine.
Weird Sawtooth G4 Performance Issues... — #2
Leopard may be part of your issue, as it's more processor-intensive than its predecessors. It's not even officially supposed to run on less than an 867MHz G4, if that's any indicat…
Can't Eject PC card from PB 1400 — #3
Glad you got it out ok. I've seen this before: there is a mode where the eject mechanism does not seem to get cocked fully when the card goes in, so none of the usual ways does an…
Can't Eject PC card from PB 1400 — #2
I got the card out.
Turns out the eject mechanism for the lower bay doesn't work for reasons unknown, the card came out with no resistance.
The upper bay eject works fine, howeve…
Wish me luck! — #2
Ugh. A mobo swap in those is a long process. It is fortunately rather straight forward, and less blood drawing than an 8500. I wish you luck and much patience.
TBird
Apple II Cross Compiler for 68k Macs? — #9
Well I appreciate everyone's suggestions. I really didn't mean anything in particular. C, Pascal, Assembly... just curious what options exist.
MPW and OrgASM or DASM looks inte…
iMac G5 Software Disks (more info included, see bottom) — #15
Try this.
http://eshop.macsales.com/OSXCenter/XPostFacto/Archive/XPostFacto4.dmg
Click to expand...
Thank You!
iMac G5 Software Disks (more info included, see bottom) — #14
Try this.
http://eshop.macsales.com/OSXCenter/XPostFacto/Archive/XPostFacto4.dmg
Lombard & Tangerine — #46
Too much! Now I'm running Ubuntu 5 from the LiveCD [] ]'>
Trackpad's a little tweaky and it's weird having to remember to use CTRL instead of the Apple key. But I'll sor…
iMac G5 Software Disks (more info included, see bottom) — #13
I noticed that when I looked at your signature in trying to determine more about your Beige G3, but when I posted that particular comment I didn't...I just assumed you were talking…
Power problem with iBook G4. — #6
Looks like liquid may have spilled onto the board at one time. I'd also replace that 5 pin IC next to that burned out IC, along with that capacitor between them. I small soldering …
Lombard & Tangerine — #45
Now it has 9.2.1 on the third partition. Man does this thing fly in the Classic OS. I'm too excited for words.
I've run Battery Reset after heebiejeebies put me on to it. I'll …
Apple II Cross Compiler for 68k Macs? — #8
Well I appreciate everyone's suggestions. I really didn't mean anything in particular. C, Pascal, Assembly... just curious what options exist.
MPW and OrgASM or DASM looks inter…
Apple II Cross Compiler for 68k Macs? — #7
On the other hand, maybe the original question implies a desire to program 6502 assembly on a mac?
Click to expand...
I discounted that, otherwise the term "assembler" would ha…
iMac G5 Software Disks (more info included, see bottom) — #12
I don't know why I brought up an iMac G3.... :
Click to expand...
That's because I have an iMac G3 and an iMac G5.
Click to expand...
I noticed that when I looked at your si…
Power problem with iBook G4. — #5
Well, an update, though not one I'm happy about. I think I may have found the problem. I found a section of the logic board towards the very front, near the front latch, that loo…
Power problem with iBook G4. — #4
It's possible it has a grounding problem because my iBook clamshell did not have the ground wire screwed into the metal shield and I could not get a charge or use the power adapter…
Power problem with iBook G4. — #3
The iBook G4 may have been (relatively) free of the bad GPU issue, but it still had a fairly common issue: cracked solder joints, typically in the power section. There are some web…
Power problem with iBook G4. — #2
The iBook G4 may have been (relatively) free of the bad GPU issue, but it still had a fairly common issue: cracked solder joints, typically in the power section. There are some web…
Lombard & Tangerine — #44
The Pismo still boots without a battery
Click to expand...
Well, this is a Lombard, not a Pismo. I'll try it in a second and get back to you
Result: MLA 1 Apple nil. I'm typ…
iMac G5 Software Disks (more info included, see bottom) — #11
I don't know why I brought up an iMac G3.... :
Click to expand...
That's because I have an iMac G3 and an iMac G5.
Lombard & Tangerine — #43
Yes, it did cross my mind when you joined up. The other macdan is a bit of a Powerbook guru.
Click to expand...
I'm just some noob that gets lucky.
Extremely Odd iBook G4 Display Problem. — #3
I don't know about the ibook g4, but if it's similar to the g3 version, the backlight inverter gets its power through a power MOSFET switch on the logic board. If you've already sw…
Lombard & Tangerine — #42
So have you tried bridging the two pins? Have some random Combo drive in my Pismo (from a Dell Pentium 4 notebook), did the same mod and it works a treat booting now.
The Pismo s…