Skip to main content
Home Forums Apple IIgs Fatal System Error 0911
Apple IIgs Fatal System Error 0911
· Hardware · 6 posts · Apr 25, 2015 — Apr 28, 2015 View original thread ↗
Ok, so I have managed to find my way back into the apple collecting hobby accidentally. :p I have since aquired an Apple IIgs that when I turn it on, I get Fatal System Error 0911. I know that the error has to do with ADB. I am going to try the lightbulb over the ADB chipset trick. I also have checked all the PSU voltages and they are within half a volt. Have I missed anything? The machine in question appears to be a ROM 0 upgraded to ROM 1, and I have tried it without anything else connected, and the memory board removed. Anything else?

There are radial caps, may want to change them for good measure.

It's possible, they dont look like they have leaked, but it couldnt hurt, any other ideas?

Ok, so I have managed to find my way back into the apple collecting hobby accidentally. :p I have since aquired an Apple IIgs that when I turn it on, I get Fatal System Error 0911. I know that the error has to do with ADB. I am going to try the lightbulb over the ADB chipset trick. I also have checked all the PSU voltages and they are within half a volt. Have I missed anything? The machine in question appears to be a ROM 0 upgraded to ROM 1, and I have tried it without anything else connected, and the memory board removed. Anything else?
Here's what I found about Fatal System Error 0911 at csa2 faqs:

0911 and 09010001 (FATAL SYSTEM ERROR 0911); was error number 0400

on ROM-00 machines. Fatal System Error 0911 and Diagnostic Self-Test error

code 09010001 mean the same thing: You are experiencing an ADB "can't sync"

problem which, usually, seems to relate to a hardware malfunction.

So, would this translate to new motherboard time then?

Let me know if you need a mainboard, I have a ROM 1 I'd be willing to give you for the cost of gas/postage/packing

mp.ls