Thread

IIci floppy drive issues

· Software · 4 posts · Aug 26, 2009 — Aug 30, 2009 View original thread ↗

#1 Wed, 26 Aug 2009 - 03:17

So the floppy drive on my IIci is acting up.

When I insert a good boot disk, it just sits there with the "?". No X, no "This installer will not work with this Macintosh", etc. What is wrong? Thanks!

#2 Wed, 26 Aug 2009 - 07:23

What version of the system is it? A IIci needs at least 6.0.4 to run.

It could be that the startup disk was made for a particular Mac model. If you made it for, say, a Plus, it will only work on a Plus. Try using an original disk or use one of Apple's disks from their site (I'd use either the 7.0.1 disk tools floppy or the 6.0.8 System Startup disk).

#3 Fri, 28 Aug 2009 - 03:29

It's a customized 6.0.8 bootdisk I made. The 6.0.8 folder on that disk is from 6.0.8 Disk 1. I will try other disks though.

Thanks!

#4 Sun, 30 Aug 2009 - 04:52

Turns out that it works again.