Thread

Finally color classic and classic II schematics!

· Troubleshooting · 14 posts · May 14, 2015 — May 19, 2015 View original thread ↗

#1 Thu, 14 May 2015 - 17:02

BLOB is definitely retired from reverse engineering and schematics! hasn't worked on a board in over two years. But I called him up and asked em very nicely and he said that he would do them if he could get them done at his own pace and take his time little by little.

So as of right now both of the color classic and the classic two are now available for sale

CLASSIC II is 8 sheets for $12

COLOR CLASSIC is 12 sheets for $18

The only other APPLE print which isn't listed on the web site (former site, now, heh heh) is the LCIII, which is 11 sheets for $16.50

Which is absolutely great because of these boards Can have serious problems usually cap Goo/rot related.

So order them up along with any of the other previously sold apple prints. These are available now because of great effort on my part, blobs part and there is also some, not large but some definite costs I've already taken care of. By the way blob is 71 years old. And I'm sure whatever nickels and dimes go his way he will use them and appreciate them

blob@onechip.com Is his new email address which is very reliable now and he does have a PayPal which he will give you when you email him and tell him the ones that you need. thanks guys and hopefully these Will help you out, I'm sure that they will.

And don't worry about mistakes because these prints that are available now are already third or fourth revision any mistakes have already been corrected .

#2 Thu, 14 May 2015 - 20:16

Does he have regular classic and classic II?

#3 Thu, 14 May 2015 - 22:20

as far as i know all he has is a PC, He gets boards in and does the R/E and then sends them back.

The Color Classic Mainboard and the Classic II main board are ones i sent em, they should be on the the way back.

#4 Thu, 14 May 2015 - 23:10

Is the Classic II the 2 ROM chip version (Rev 2), or the 4 ROM chip version (Rev 1)?

#5 Thu, 14 May 2015 - 23:17

good question, i forgot what one i sent em.

#6 Fri, 15 May 2015 - 01:20

How about Quadra 840av schematics?

I have not one, not two, but THREE dead boards I'd like to get working someday.

And anyone asks, yes, they've been recapped and washed. There's some rot somewhere, but I don't know how to fix it (or even how to find it). I should learn....

c

#7 Fri, 15 May 2015 - 02:59

yes he has those Q840av Schematics!

#8 Fri, 15 May 2015 - 03:06

uniserver said:
BLOB is definitely retired from reverse engineering and schematics! hasn't worked on a board in over two years. But I called him up and asked em very nicely and he said that he would do them if he could get them done at his own pace and take his time little by little.

So as of right now both of the color classic and the classic two are now available for sale

CLASSIC II is 8 sheets for $12

COLOR CLASSIC is 12 sheets for $18

The only other APPLE print which isn't listed on the web site (former site, now, heh heh) is the LCIII, which is 11 sheets for $16.50

Which is absolutely great because of these boards Can have serious problems usually cap Goo/rot related.

So order them up along with any of the other previously sold apple prints. These are available now because of great effort on my part, blobs part and there is also some, not large but some definite costs I've already taken care of. By the way blob is 71 years old. And I'm sure whatever nickels and dimes go his way he will use them and appreciate them

blob@onechip.com Is his new email address which is very reliable now and he does have a PayPal which he will give you when you email him and tell him the ones that you need. thanks guys and hopefully these Will help you out, I'm sure that they will.

And don't worry about mistakes because these prints that are available now are already third or fourth revision any mistakes have already been corrected .

MY bad, I thought you meant that he had color classic and color classic II... Both of my classic IIs are 2 rom boards so if you sent a 4 rom version I could potentially send a 2 rom version

#9 Fri, 15 May 2015 - 03:21

pretty sure the differences between the ROM 1 and 2 versions are not important. If you decide you want to be particular, thats totally cool, but if you are really trying to fix your Classic II main board, then REV2 REV1 is not going to matter much at all when it comes down to the meat and potatoes of the board.

#10 Sun, 17 May 2015 - 03:05

I thought for the Classic II's there was quite a bit of difference between the two revisions?

#11 Sun, 17 May 2015 - 03:13

nothing too significant.

#12 Tue, 19 May 2015 - 04:55

just got my boards back, yup the Classic II is the 4 Rom version.

#13 Tue, 19 May 2015 - 09:38

Alright. I'm going to order up a set then, it should really help when this thing decides to give me trouble in the future.

#14 Tue, 19 May 2015 - 10:55

Awesome man , Did you get MLCC's on there or stock Panasonic electrolytics? I forgot. I'm sure blob would be happy! I think he just turned 71