217finalpcsetupinstall

pcSetup 2.1.7 Installation Guide Version 6, August 29, 2000 Copyright © 2000 Fraser Valley Distributed Computing Systems, Inc., a subsidiary of Discovery Software Limited, All rights reserved Introduction Thank you for purchasing the latest edition of pcSetup. PcSetup 2.1.7 is the third version that has been specifically designed for use with Windows 95/98. It corrects many of the problems experienced under pcSetup 2.0. and pcSetup 2.0.1 New Features of 2.1.7: • A message passing system that allows information to be transferred directly from Windows to the Mac, bypassing DOS altogether. This creates a faster, more stable flow of information. • A 32-bit hard drive controller for increased speed and performance. • A 32-bit CD-ROM drive controller, which will support long filenames. Requirements: The installation of pcSetup 2.1.7 takes a little time but is quite easy. You must have pcSetup 1.6.4 or 2.0 and Windows 95B(OSR2) or Windows 98 already installed on your computer.(pcSetup 1.6.4 is available to download free of charge at - http://asu.info.apple.com/swupdates.nsf/artnum/n10766) To determine which version of Windows you are running see the F.A.Q of the installation guide. Note: pcSetup 2.1.7 is not compatible with Windows NT or Windows 2000. PcSetup does not support Windows 95A. Warning * This software will not function without a valid authorization code. If you try to run the windows drivers with the Mac 1.6.4 drivers your PC will crash.* Copyright © 2000 Fraser Valley Distributed Computing Systems, Inc., a subsidiary of Discovery Software Limited, All rights reserved Installing pcSetup 2.1 .7 *If upgrading from pcSetup 2.0, the CD-ROM, hard disk, and floppy disk Controllers must be removed before proceeding with 2.1.7 installation.* Download the two driver files for pcSetup 2.1.7 from the Host Web Browser (www.pcSetup2x.com). Once downloaded, the driver files should appear on your Mac desktop. Copy the Windows pcSetup 2.1.7 driver files (named pcSetup 2.1.7.exe ) to a floppy disk. There are two steps to the installation process of pcSetup 2.1.7: the Macintosh installation, which must be done first, and then the DOS installation. To Install on The Mac Side: 1- Make sure that pcSetup1.6.4 or 2.0 is installed. (pcSetup 1.6.4 is available at http://asu.info.apple.com/swupdates.nsf/artnum/n10766) 2- Click on the newly created Mac driver file icon on your Mac desktop and follow the installation procedure. To Install on The DOS Side: 1- Ensure that pcSetup 1.6.4 or 2.0 and Windows 95B/98 are installed. 2- Insert the floppy disk with the Windows driver files (pcSetup 2.1.7.exe) on it into the floppy disk drive and follow the installation procedure. 3- To complete the installation of pcSetup 2.1.7, you must install the hard disk driver manually using “Add new Hardware” wizard in the Device Manager D…