Folder Bolt Pro 1.0.3 Read Me

FOLDERBOLT PRO™ RELEASE NOTES Version 1.0.3 Thank you for purchasing FolderBolt Pro. Before you begin using FolderBolt Pro, please read through this document. It contains important information about changes and additions to FolderBolt Pro after the User Guide was printed. Please back up your disk(s)/diskette(s) if you haven’t already. Then turn to the User Guide and read the first two chapters. For a “quick start,” just read page 14. In order to operate properly, FolderBolt Pro requires version 6.0.7 (from September, 1990) or newer of the Macintosh System Software. If you are using System 6, you will also need to have MultiFinder on in order for FolderBolt Pro to operate properly. FolderBolt Pro also works properly with all versions of System 7. If you have a version of the Macintosh System Software older than System 6.0.7, please consult your Macintosh reseller for an update. ◊ You may encounter an incompatibility with the System 7.5 Finder Scripting Extension and FolderBolt Pro. If so, simply move the file “Finder Scripting Extension” to the System Folder level so that it loads after the FolderBolt Pro Control Panel at startup time. ◊◊◊ VERSION 1.0.3 ADDITIONS ◊◊◊ ◊ Testing has revealed that in certain circumstances, Retrospect Remote can be over-cautious about backing up the contents of normally-bolted (programmatically - accessible) folders. If the FolderBolt Pro Installer detects Retrospect Remote installed in your System Folder, an extra Extension, called “Bolt Backup Enabler,” will be installed in your System Folder to assist Retrospect in backing up your machine at shutdown time. ◊ The FolderBolt Pro Installer now has the ability to detect certain Extensions that are known to cause conflicts with FolderBolt Pro and offer to relocate them to prevent the conflict. Version 1.0.3 only checks for the presence of the Finder Scripting Extension and offers to move it into the System Folder, where it will operate normally but will not conflict with FolderBolt Pro. ◊ A preference was added enabling you to control how remote folders are rebolted from the - 1 - desktop. This new preference is controlled through the General Preferences dialog box, which has consequently changed from that pictured in the manual. ◊ Errors encountered when performing network administration will be added to the FolderBolt Log file on the Macintosh the Administrator is running from. ◊◊◊ VERSION 1.0.2 ADDITIONS ◊◊◊ ◊ Improved system version checking for network administration. ◊ Improved error message handling in the Administrator’s Network Monitor window. ◊◊◊ VERSION 1.0.1 ADDITIONS ◊◊◊ ◊ If you are running on a Power Macintosh, the FolderBolt Pro Installer will install extra CryptoMactic encryption modules optimized for use on the Power Macintosh. In some of these modules, some animation options are not available, since their…