Losttreasuresii Refcard

Cfl-l'ELOS'ITJ{'E4.S'l12{'ES of I9{:FOC09'vf' II C'lJ 2{09'vf 'R.J!ference Carafor !'BM® ana Macintosh Computers 'Iliis C1J-'l{OM can 6e usea on 6otn systems. Macintosh IBM To use the Lost Treasures II CD-Rom Macintosh you To use the Lost Treasures II CD-Rom IBM you will need the will need the following: foJJowing: •IBM PC or campatible with 512k RAM •Macintosh Plus or higher •MS DOS® version 3.0 or higher (5 .0 compatible) •System 6.0 or higher •CD-ROM drive •Apple CD-SC CD-ROM drive or equivalent •MSCDEX 2.1 or greater. •ISO 9660 File access file must be in your System Folder. •ANSI.SYS device driver (See reverse side for further informa- tion) Getting Started: Getting Started: Insert the Lost Treasures CD-ROM into your CD- 1. Make sure your CD-ROM drive is connected and the CD-ROM Drive and double click on the volume to open the drivers are installed. volume window, double click on the MAC Folder, then double click on the name of the game you wish 2. Boot your system and insert the Lost Treasures CD. to play. 3. Select the CD-ROM drive by entering its assigned drive Jetter at the DOS prompt as you would a hard disk or floppy. 4. Type "CD DOS" (This will put you into the DOS directory). 5. Type the name of the game you wish to play and press [Enter]. (eg. Type "AMFV" [Enter]) Should you encounter techinical problems while playing The Lost Treasures II CD, please call Customer Support at 310 207 4500 between 9:00am and 5:00 pm Pacific Time. CD-3015-07 Attn: DOS USERS A few words about ANSI.SYS: The ANSI.SYS driver is required by many of the titles in Infocom's Lost Treasures. If your screen looks garbled when you try to run a game it' s probably because ANSI.SYS is not installed properly. If you need to install ANSI.SYS, do the following: DOS 3.0, 3.3 AND 4.0 USERS 1) Ma…