Tempo X Sata 44 Qsg

TEMPO -X SATA 4+4 ™ 8-Port Serial ATA PCI-X Host Controller Quick Start Guide for Tempo-X SATA 4+4 You Should Have The following items should be included in your product package: • One Tempo-X SATA 4+4 card • Two internal Serial ATA data cables • Eight screws (for mounting hard drives) • Two legacy to Serial ATA power cable adapters The following items may be required for installation: • Medium Phillips screwdriver • Internal drive mounting hardware (sold separately) • One or more external drive cases (sold separately) • One or more additional internal Serial ATA data cables (sold separately) • One or more external Serial ATA data cables (sold separatel • One or more legacy (4-pin) power cable Y-adapters (sold separately) • One or more legacy to Serial ATA (4-pin to 15-pin) power c adapters (sold separately) • One or more Ultra ATA to Serial ATA adapters (only used to parallel ATA drives, sold separately) System Requirements The Tempo-X SATA 4+4 requires the following in order to operate in your sys- tem: • One available PCI-X or PCI slot • One or more available hard drive bays (depending on configuration) • Mac OS ® X Version 10.2.x or later Support Notes: We recommend that you make a backup of important information on your system’s current hard drive prior to installing new hardware or software. When handling computer products, you must take care to prevent components from being damaged by static electricity. Before opening your computer or removing parts from their packages, always ground yourself first by touching a metal part of the computer, such as a port access cover, and work in an area free of static electricity; avoid carpeted areas. Handle all electronic components only by their edges, and avoid touching connector traces and component pins. Also, avoid touching the logic board and any of its components. WARNING: This product is not compatible with the HighPoint RocketRAID product or the kernel extension installed by its supporting software. If you have the HighPoint product installed in your system, be sure to remove the HPTRAIDController.kext file before you install the Tempo- X SATA 4+4 into your system. Refer to the RocketRAID documentation for detailed instructions. Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases. Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com. Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350 ©2004 Sonnet Te…