Open Apple Vol 5 No 08 SEP 1989

_A2-Central Ee A journal and exchange of Apple II discoveries Open-Apple if. September 1989 Vol. 5, No. 8 ISSN 0885-4017 newstand price: $2.50 photocopy charge per page: $0.15. Apple upgrades llgs hardware New IIgs computers will be shipped with a 1 megabyte memory expansion card and a revised motherboard, Apple announced August 15. These machines will have the same look, the same name, and the same price ($1,149) as previous models of the IIgs. Motherboard revisions include a doubling of ROM memory from 128K to 256K so that more tools and parts of the operating system could be included in ROM; provisions for allowing more slots to be set to "Your Card’ without losing builtin machine capabitities; cleaner sound and graphics; and enhancements for the disabled, such as sticky keys (allows users to enter multi-key combinations such as open-apple-? in sequence rather than all at once) and the ability to do more things from the keyboard without using the mouse. The new machines will ship with IIgs System Disk 5.0, which is now available from Apple dealers, the national online networks, and other official sources (such as our monthly disk). As noted here in June, System Disk 5.0 works with older IIgs models as well as new ones. It gives older machines about 90 per cent of the power of the new machines. No upgrade program will be announced, Apple said, because the increase in functionality of the new motherboard is minimal com- pared to what an upgrade would cost.-TW Developers form new group Developers of hardware and software products for the Apple IL meeting at the A2-Central Developer Conference in July, voled to form a new association to open better lines of communication with Apple management. The first official meeting of the organization will be at Applefest in San Francisco, Sunday morning, September 24, from 9 to 11 am. A temporary board of directors was elected. Board members are Barney Stone of Stone Edge Technologies, Rogér Wagn- er of Roger Wagner Publishing, Mark Simonsen of Beagle Bros, Kon Lewin of Micol Systems, Bill Mensch of The Western Design Center, and Tom Weishaar. Developers at the conference were discontented with Apple's posi- tioning of the Apple II family, both inside Apple and in the market- place. In his keynote address, Bill Mensch, designer of the micropro- cessors used in today's Apple Ils, ripped Apple for its lack of attention to the Appie Il. Mensch confirmed that he is working on new one-chip gallium arsenide microcomputers, designed specifically for parallel processing, that would allow Apple to build super computers that would still run all previous Apple II software. However, Mensch said that Apple has not yet shown an interest in the chips. Developer discontent faded during Laser Computer, Inc.'s presenta- tion, however. Lasers Mike Wagner made it clear that his company was very interested in the Apple Il market and in working with Apple II developers. He offered developers equipment discounts and a low- cost marketing program that would put color ads for developer's prod- ucts in the box with new Laser computers. Wagner said that Laser was selling its computers as fast as it could make them {currently 12,000 a month) and that it expected to soon have higher unit sales in the Hie/lc market than Apple itself. Clearly Laser has better prices, a bet- ter warranty, and a discontented Appie II market to work with. Calling the IIc-Plus a ‘Laser clone’, Wagner unveiled a prototype 65816-based computer to show that Laser also wants to match or beat Apple's technology. Another factor softening developer discontent with Apple was Apple's commitment to and heavy participation in the conference. Apple sent 20 people (15 per cent of the conference participants were Apple employees—lown from 50_per cent at Apple's own devel- oper conference, but a respectable chunk nonetheless). Apple's peo- ple were primarily from engineering and developer technical support. They participated in many sessions as well as running a debug room where nasty problems were solved. Although the conference sessions were heavy with excitement and technical information, some of the best moments were in between- session group discussions and demonstrations in the halls, dorms, and cafeteria. Two of the more interesting conference attenders were Vladimir Fedorov and Alexander Surouegin from the Lidar Research Institute in Moscow. Their institute has contracted to import 100,000 Pravetz-8a computers into the Soviet Union from Bulgaria, where the Praveiz, an Apple Ile clone, is manufactured. The computers will be sold to schools and the institute will support them, Surovegin and Fedorov were at the conference looking for companies interested in selling Appfe Il products in the Soviet Union. In addition, their insti- tute has developed an Apple Il-based spectral analyzer, a scientific laboratory instrument heretofore available only in much more expen- sive configurations, that they would like to distribute outside the Sovi- et Union. All of the sessions were recorded on videotape and we've made audio tapes from the video masters. See this month's catalog for information on how to obtain copies of the tapes you're interested in, or to easily start a video tape rental library for your user group.-TW OR “OOPS-HERE'S THE PROBLEM. SOMETHINGS CAUSING SHORTS iN THE FRINTER.” 5.58 A2-Central Subtle change at A2-Central The ‘-TW' appended to the preceding articles indicates they were written by me, Tom Weishaar. We've decided to start adding the authors initials to the end of staff-written articles and our responses to letters because there are many of us writing things around here nowadays. Starting with this issue, in fact, Dennis Doms is officially editor of this newsletter and is responsible for seeing that we publish an issue every month. Jay Jennings, known to many of you as A2.JAY and head of the A2 University on GEnie, has joined our staff here in Over- land Park. Chet Day (A2.CHET), formerly A2's bulletin board editor on GEnie, Is now our head sysop. The purpose of these changes is to give me more time to work on developing new products.-TW Miscellanea igs System Disk 5.0 ships. Apple's System Software 5.0 was released on July 17th and should be in the hands of authorized Apple dealers now, The suggested retail price of the software package with manuals is $49; Apple has also made the software itself available from licensed user groups and licensed on-line services. Those who purchase Iigs systems on or after the announcement date will receive the new software and manuals free of charge, as will subscribers to the Apple Software Update program. The System 5.0 package includes the /SYSTEM.DISK and /SYS- TEM.TOOLS volumes along with a manual describing the care and use of the software, similar to the materials presented in the package for System Disk 4.0. Also included is a Macintosh-format upgrade disk to install the new version of GS/OS on an AppleShare file server, and a ‘manual on use of the AppleShare support features of 5.0. These fea- tures indicate a significant strengthening of the Apple ligs's utility in a networked system, and we cover them in detail in this issue (‘Apple- Share and the Apple iI’). A broad overview of the features of System Disk 5.0 was given in the June 1989 A2-Central (‘Apple announces a faster llgs’). There are so many buzzers and bells on the new /SYSTEM.DISK and /SYS- TEM.TOOLS disk that each of the two disks is very nearly full, which is making installation troublesome for some users. To this we can only say, use the supplied Installer for all installations. Some users are try- ing to carry out installation manually as they did for System 4.0; but System 5.0 includes several files with an ‘extended’ storage type that will not be handled properly by common file copy utilities such as Copy I Plus. if you copy these files with such a utility, you may not be notified of an error, but you also will not have transferred the com- plete file. The new Installer and Finder are capable of dealing with these files, but only the Installer has the knowledge (provided by its ‘script’ files} of what associated files to copy for an installation. Installing System 5.0 on a device not recognized by the default config. uration of /SYSTEM.DISK therefore becomes a two-step process; you create a boot disk with the necessary drivers added, then boot that disk to install 5.0 on the destination device. To create a boot disk, boot a write-protected copy of the /SYS- TEM.DISK and make note of any messages it prints regarding the need to install various drivers. For example, if you have an Apple Il SCSI card installed, a message will appear informing you of the need to install a driver for that device. You can continue the boot process by pressing Return" to skip past each notification message. When you reach the Finder Desktop, insert and initialize a new disk named ‘/INSTALL' (on a single 3.5° system, you'll need to eject /SYSTEM.DISK to do this; GS/OS will notify you when it needs a particular disk). From the Desktop, drag the icon for /SYSTEM.DISK on top of /INSTALL and follow Finder's promptings to copy the disk. Now you have a copy of /SYSTEM.DISK named */INSTALL’. Next, insert your write-protected copy of /SYSTEM.TOOLS and install any necessary drivers, being careful to select /INSTALL as the target disk (again, on a single-3.5 system, this may require swapping disks using the same drive). Follow any prompting that Installer pro- vides regarding the need to insert a particular disk. Installer may very likely have to delete some files to add the drivers. Once the proper drivers have been added, you can quit Installer Vol. 5, No. 8 (swapping disks as requested) and install using your configured ANSTALL disk. Launch Installer from the configured boot disk and proceed to add the new system files to your hard disk, if needed, and select other items from the Installer menu that seem appropriate. When Installer prompts you for the /SYSTEM.DISK, insert the original (or a copy) of /SYSTEM.DISK, not your configured boot disk. We've already discovered that even this approach won't help with certain configurations. For example, if you try to install the "LaserWrit- er’ option on a 5.5" disk, Installer will tell you that you need 146K more space (see “System _Disk 5.0" in “Ask Uncle-DOS'). Due to antici- pated complication in this and future releases of the llgs System Soft- ware, we cant advise on custom installations bypassing the Installer; if you have problems that your dealer can't solve, contact Apple and let them know what problems you're having with your system configu- ration. Only if Apple is properly aware of any problems can they be worked out of the next release. Beware the BASIC.SYSTEM v1.3 bug. There is one exception to the above admonition to ‘use the Installer’. In a heartening moment of candor, Apple II DTS revealed in the "ProDOS 8 Programming Con- siderations’ session at July's A2-Central Developer Conference that BASIC.SYSTEM v1.3 has a serious bug. This new version of BASIC.SYSTEM is Apple's first attempt to completely remove all docu- mented bugs in BASIC.SYSTEM. Unfortunately, the new bug is not benign. Due to a missing RTS that escaped the detection of those testing the software, if you try to BLOAD a file to an area of memory that ProDOS 8's system bitmap considers ‘protected’, BASIC.SYSTEM will try to BSAVE an area of memory back into the BLOADed file's image on disk. If the file and disk are write-enabled, the result is obvi- ously disastrous. For this reason, you may want to consider retaining BASIC.SYSTEM version 1.2 on your System 5.0 boot disk until Apple irons out the problem unless you are very sure that you won't trigger the above bug. Another glitch is the lack of an equivalent to the ‘Device Connect- ed’ (printer or modem) selection in the Control Panel NDA for the printer and modem ports. If you need to alter this item for either of the ports, you'll have to enter the ‘Classic’ Contro! Panel to do it. We haven't seen one yet, but for those of you who have been looking for an alternative to the Apple 3.5 drive, American Micro Research sells a daisy-chainable 800K drive compatible with the ligs and llc Plus for $259. For a Ile, AMR also has an interface card that allows daisy-chaining up to four drives. AMR also sells hard disk sys- tems, including a drive that uses a removable cartridge with 45- megabyte capacity for $1695. The AppleWorks Programmer's Association (A.P.A.) is intended for programmers, developers, and other individuals interested in pro- ducing AppleWorks+elated products, including templates, patches, macro routines, TimeOut applications, stand-alone programs utilizing the AppleWorks data file formats, informational materials related to AppleWorks, and so on. The current directors are Don Aquilino (Acta- soft), Dave Gair, and Tom Hoover. A.P.A.'s directors cited the implica- tions of AppleWorks v3.0 and TimeOut UltraMacros v3.0 in providing a near-limitless platform for development of further applications as an impetus for the formation of the association. Interested parties should contact the AppleWorks Programmers Association, 6531 Lex- ington Avenue, Los Angeles, CA 90038-1451, 215-467-6922. A July Universal Press Syndicate computer column by Bob Schwabach sang the virtues of AppleWorks 3.0: "This is the best home and small-business program ever written for Apple computers and may be the best program ever written for any computer.” “Apple lgs version: Faster than Color Mac I version". We dont often have time for games, but that blurb on a sticker attached to Crystal Quest (Casady & Greene Inc., PO Box 223779, Carmel, CA 93922) caused us to stop and purchase the package. There is a defi- nite flavor of Mac in the package, down to the enclosed promotional flyer for Mac products, but you have to love a company that would put such a sticker on a package where even Apple's marketing people can see it. Apple Computer Australia plans an Apple I developer's con- ference to be held in Sydney from October 6th to 8th, 1989. Those interested should contact Godfrey Gamble at Apple Computer Aus- tralia PTY LTD, 16 Rodborough Road, French's Forest, NSW 2086, AUSTRALIA, (phone) 612-452-8214, FAX 612-452-8160, AppleLink Apple Edition AUST.DEV, -DJD September 1989 AppleShare and the Apple II After what seemed an interminable wait following the Mac and MS- DOS versions, Apple released AppleShare support for the Apple II computers last September. The AppleShare Ilgs WorkStation Software used the ligs's built-in AppleTalk facility to connect to AppleShare and an Apple I WorkStation Card was released to connect (128K enhanced) Apple Ile's to the network. The AppleShare ligs Workstation Software used the equivalent of System Disk 3.2. The incorporation of AppleShare support into the new llgs System Software 5.0, however, does away with the need for special workstation software and has produced an environment that we hope to adapt to our office situation. We'd like to share some of the delails we've discovered for others interested in seeing what net- working may mean to their future and to the continuing future of the Apple il. The intent of a network is to let several computer users have common access to the same resources. This allows, for example, many computers to share the use of a single large hard disk for mass storage or the use of a single printer. Even with the added expense of the extra hardware and software needed to operate a network, the ability to share resources that each individual on the network may use only a small percentage of the time can offset the extra expense. For example, it is more sensible for several computers to use one expen- sive LaserWriter on a network than to buy a LaserWriter for each com- puter. Each individual user usually wont keep a printer busy 100 per cent of the time and an idle printer may as well be put to use by someone else. The network also saves time by automating the use of a network resource. Several users can share a printer attached to a computer dedicated to printing documents, but each person has to constantly check to see when the computer and printer are available. In a net- work situation, a computer can be configured as a print server to accept print requests from other computers on the network. The doc- uments in these requests can be accepted, stored on the server's mass storage device, and sent to the printer one by one as the printer becomes available in a process called spooling. This keeps users on the network from having to wait for the previous printing job to com- plete itself and makes it appear almost as if they have exclusive access to the printer. Flexibility can be added by using the network's ability to connect several alternative printers for selection by a user. An ImageWriter II may be selected if it is deemed more suitable for a printing task than a LaserWriter. Various printers can also be prepared to print on specif- ic letterhead or forms and users can route their document to the printer with the proper configuration. A network “Chooser program can be used to select the proper printer, and a ‘Namer’ can be used to give the printer a representative name (such as ‘Letterhead’) if desired. In addition, AppleShare can facilitate accessing of common files by users, either by sharing the use of programs, by transferring data via inter-user ‘file copy’ operations, or by allowing several users to oper- ate ‘interactively’ on a file. AppleShare as supplied by Apple is not sufficient to carry out these activities by itself; for example, there is no ‘mail’ system in place for Apple II users yet. Appleshare does sup- port mechanisms to implement such a system, though. Multi-user applications are not common now, but AppleShare for the II Is new and such applications (we hope) will come. Apple refers to the basic network unit as LocalTalk. Each LocalTalk network can contain up to a total of 32 devices (a mixture of comput- ers, printers, or other AppleTalk devices). LocalTalk networks can be connected to each other or even to other types of networks to form an internet using an interfacing device which Apple refers to as a “router’ (you may also see it referred to as a ‘bridge’). The networks within an internet can also be grouped and identified to the network as zones. Internets can be very large and complicated; we'll stick with AppleShare in a simple single LocalTalk unit for our discussion here. ients for an AppleShare system include a computer to manage the network resources (the server), the computers individuals use to connect with the network (workstations), and any supporting hardware that people on the network may want to use (printers are a common example). A2-Central 5.59 The most useful peripheral you can add to a network is a hard disk. The software for sharing a hard disk is called a ‘file server’; in comput- er jargon, the computer managing the network, the hard disk, and the software are often called ‘the server’, It's helpful to remember that to a user ‘the server’ looks like and acts like a relatively slow hard disk connected directly to the user's computer, except that other users can also access it. In AppleShare, a dedicated Macintosh must be used as the file server. Dedicated” means the Mac can only be used to run the server software; it will not be available to run Macintosh software. You'll need at least one hard disk attached to the Macintosh to-use as the server volume accessible to the other computers on the network. Additional server volumes (or even servers) can be added to the network if desired. To prepare the Macintosh for use as a server, The most use- you'll need Version 2.0 or later of the AppleShare ‘I File Server software ($799 per server); previous ful portals versions do not support Apple II workstations, you can a If you plan to use network printers, you may toanetwork also want to obtain the AppleShare Print Server is a hard disk. |sofware ($299 per server) that allows the server The software to arbitrate printing jobs to up to five printers a assigned to the network, This arbitration for sharing a includes the ‘spooling’ ability mentioned earlier. hard disk is You can also elect direct access to any of the five called a "file ‘captured’ printers, or to additional printers avail- * able on the network, but these direct print jobs server. won't be automatically spooled by the server if the selected printer is busy. You'll have to wait for the printer to complete any previous job before your computer can begin its printing operation. An ImageWriter I or ImageWriter LQ can be added to the network if an ImageWriter !1/LQ AppleTalk Option ($159) is installed. The Laser- Writer, on the other hand, includes an AppleTalk interface; the expense of a LaserWriter becomes more justifiable as you increase the number of workstations that use it, especially if you need high- quality printouts. If a user desires a ‘local’ printer dedicated to his workstation alone, one can be connected via a normally configured serial port on the workstation. Apple II workstations can be 128K enhanced Ile computers with an Apple Il Workstation Card ($249), or a 512K (minimum) Apple ligs using its internal AppleTalk hardware. To boot from the server, you must upgrade the IIgs memory to at least 768K. Apple II Workstation Software for the Ile is supplied with the Workstation Card. The Apple Ilgs workstation support is integral with Ilgs System Software 5.0; the 5.0 distribution package even includes a Macintosh-format disk with the new system software update ready to install on the server. To connect the server, workstations, and peripherals you can use LocalTalk connector kits from Apple dealers, or alternatives such as PhoneNet (from Farallon Computing, 2150 Kittredge, Berkeley, CA 94704, 415-849-2331) or DataSpec ModuNet (from A2-Central } con- nectors. We recommend the alternative methods because they use very inexpensive four-conductor phone wire for connections, as opposed to Apple's expensive LocalTalk cabling, and often offer more flexibility in configuring the network topology (‘topology’ refers to the ‘shape’ of the network based on the path of the connections). You need one connector for each device (computer, printer, etc.) on the network. To make the Mac usable as a server, you first install the server software. The file server software comes in two ‘flavors’: one set of disks for the Macintosh 512e, and another set for the Macintosh Plus/SE/II series. Apple does not encourage using a Mac 512e as a server and recommends an upgrade to the minimum of a Mac Plus. The software disks include the Macintosh Installer program, with ‘scripts’ for the installation of version 6.0 of the Macintosh System Software and the server software for the various members of the Mac family. Also included is the application AppleShare Admin, which allows the network administrator to prepare the server to accept users and to control the access users have to various files on the server. You use the Installer to place the necessary software on the hard disk to be used as the server volume. An Apple II Setup supplemental software disk is provided with the AppleShare server software version 2.0; this disk contains the equiva- 5.60 A2-Central lent of llgs System Software 3.2. IIgs owners will want to be sure and use the Apple II Setup disk that comes with System Software 5.0 instead. The Apple I! support must be installed to allow use of Apple il workstations with the server. ‘The Print Server software is sold separately, and its use is optional. If you do decide-to install the print server support on your file server, you can elect to have the print server run ‘concurrently’ with Apple- Share; that is, when the file server is running, the print server soft- ware is also active. After you have installed the server software on your Macintosh boot volume, you need to run AppleShare Admin to prepare the hard disk for use as a server volume. On our system, we elected to actually use an external hard disk as the server volume and reserve our Mac SE's internal hard disk for use in case we needed the Mac for itself (be assured this is a rare occurrence). We connected the external drive to the Mac SCSI port and prepared it for use, then ‘skipped’ the internal hard disk when selecting volumes for use as server volumes. One of the options within AppleShare Admin is "Select Concurrent Startup Application’ (below the ‘Server’ item in the menu bar);.here is where you can elect to have the printer server functions (if installed) also enabled when the server is powered up. Once completed, when you start up the Macintosh from the server volume you are eventually greeted by the AppleShare status display screen, unless you have the print server set to run concurrently (in which case the print server status screen will be presented). The sta- tus screen information is basically limited to showing the available server volumes, the users that are using the server (‘logged in’), and the activity of the server regarding the network as a scale from ‘idle" to "busy’. The AppieShare File Server Administrator's Guide and the Supple- ment for Apple fl Workstations supplied with the AppleShare software explains most of the details of working with the server itself. The orga- nization of the users and their folders on the server requires some planning. System administration is the most complicated part of working with AppleShare, Administration involves creating and identifying the users, groups, and ‘folders’ (subdirectories) on the server volume in such a manner that everyone has access to what they need, but no one has access to places they shouldn't be allowed. A ‘user’ is an indi- vidual who should be allowed access to the server through a worksta- tion. A "group" is a defined set of users; a group is usually created to Give several users a common set of privileges to access files or fold- ers on the server. A server ‘folder’ is analogous to a ProDOS subdirec- tory. The first time you run AppleShare Admin, There is a Pah 1 eat " « Jyou must supply a name to ident ie server Startup Info (computer) on the network, and a password to option to allow fuse when working at the server to allow future defining the access to the administration program. The . }password keeps someone from just walking up Startup applica to the server and identifying themselves as the tion, user pre- Jadministrator; however, the password won't fix, and default |prevent someone from booting from a floppy i lon the Mac and re-formatting the server vol- printer for the ume. For the latter reason, you need to keep displayed user. |tne server in a physically secure place away from possible vandals or someone who may destroy your work while ‘playing’ with the server files. To activate the Apple !I functionality of the AppleShare server from AppleShare Admin, you select the ‘Server Info* item from the 'Server" menu. In the window that appears is a checkbox item marked "Apple il Admin’; mark the box and wait a few moments for the server to prepare itself. Once this is complete, an ‘Apple II" item at the far right of the menu bar will activate. Each user is added by selecting ‘Create User’ from the "Users* menu. In the ‘User’ information box that appears, you then enter the name of the new user; this should correspond to a valid ProDOS file- name since it is also used as the name on a folder containing the user's parameters. An initial password can be specified and. the administrator can select whether the user is allowed to change it (cur- rently, Ile owners do not have a way to do this from the workstation), and whether the user is allowed to log in. Press ‘Return’ to save the user name and you will see the name show up in a "User List" window Vol. 5, No. 8 on the desktop (if the window isnt open, it can be displayed from the ‘Users’ menu). Up to 8190 users can be registered. Once a user is cre- ated, the lower half of the ‘User’ window becomes active which allows you to specify ‘groups" to which the user belongs, and the startup pre- fix and application as well as a default (network) printer for the user. In the ‘Apple Il" menu, there is a ‘Startup Info" option to allow defining the startup application, user prefix, and default printer for the displayed user. The startup and prefix options are used for situa- tions where a workstation is booted from the network rather than from a disk drive attached 'to the workstation; once the user identifies himself by logging in to the server, the startup application is executed and the working prefix for that user is set to the indicated folder. On our system, we created a specific folder for each anticipated user on the system, transferred ownership of the folder to that user, and entered that folder's pathname as the prefix for the user. For a startup application for the Ile, we specified BASIC.SYSTEM; for the IIgs users, we specified the System 5.0 Finder once we had completed the Has System Software installation from a workstation. Access privileges for folders can be set by the administrator for any folder on the system. This means the administrator can see every- thing on the server, including files and folders other users ‘own’. in addition, a user is given ownership for any folders the user creates; the owner’ is allowed to modify the access privileges for the folder and files (including other folders) later added to it. AppleShare Admin allows you to assign users to a group via the "Create Group’ item on the Groups’ menu. A window will open that allows you to name the group, and then you ‘drag’ a copy of the icon of any user you wish to add from the ‘Users window to the ‘Members* list in the “Group” window. You can also select an existing Group for modification by double-clicking on the Group name within the ‘Group List* Preparing the fle workstation. On the lle, the workstation card can be installed in any available slot; we used slot | since the card imitates a more ‘classic’ serial interface in addition to the AppleTalk port and can double as a printer interface card for a serial printer without AppleTalk. Aer making a working copy of the disk included with the Workstation card, the copy can be booted from a drive attached to the lle. A menu is presented; among the options are "Log in to a file server’. If you select this item, you will be prompted to “Select a file server’ (if you have more than one server on the net- work). Once the server is selected, you are able to elect to log on asa ‘Guest’ (a user who has not been identified to the server}, or as a ‘Registered User’ known to the server. If you select "Guest. you will be able to access the server with privileges allowed to a generic "<Any User>" as defined by the administrator, If you select ‘Registered user’, you will be prompted for your user name and password; if you supply a correct combination, you will be given access appropriate to your user name. You can also elect to boot from the server by booting from the Workstation card as if it were a disk drive interface. The exception is that, when using a command such as ‘PR#n’ (where ‘n’ is the Worksta- tion card's slot) to boot from BASIC, you must hold down the open- apple key as you press ‘Return’ to execute the command. Your system will be booted using the ProDOS 8 version available on the server, then you will presented with the log in screen prompts mentioned pre- viously. When you log in, you wili be assigned the prefix specified for your user name (or "<Any User>') and the associated ‘startup" applica- tion will be executed. The default is normally BASIC.SYSTEM in the SYSTEM folder created when the server is prepared, but the adminis- trator has the power to change this. The Apple Il Workstation software supplied has several useful net- work utilities: a Chooser to select the network printer or other resources you need, a Namer to alter the name of certain devices on the network (so far, we've been able to stick to the defaults), a version of System Utilities which will work on network volumes, an Access program so you can review and change access privileges on folders {where permitted), and a program to allow you to log off from the net- work gracefully. You may want to copy some or all of these utilities to the network volume; if you intend to use a Ile as a ‘diskless worksta- tion" (using only the server volume as a disk drive), you will definitely need to place the Chooser, Access, System Utilities, and Logoff utiti- ties in an accessible folder on the server volume. We found most of the utilities reasonably usable, although some- September 1989 what confusing at times. System Utilities is not our favorite set of file/disk utilities, but most of our ‘classic* utilities (Copy Plus, Cat Doctor) violate AppleShare programming principles for some func- tions. The Access program seems to have been designed by a numerologist; rather than using some translation of the Apple Human Interface Guidelines for keyboard commands, Access uses open- Apple non-intuitive number key equivalents for many functions such as ‘Open’. It's difficult to understand how Apple can comment on "inferior user interfaces when Apple remains quilly of not applying its own principles uniformly. Finally, the selector Apple supplies on the He Workstation disk is not transportable to the network volume, which leaves the user with- out a method to run the various programs. Apple's solution for this is Aristotle ($199 per server), which is intended for a classroom situa- tion where a teacher assigns lessons to a group of students. We could- nt work with the rigid structure imposed, and instead installed the Windows selector and file reader from our monthly disk to use as a selector for the Ile. AppleTalk for the Igs is activated by setting the Control Panel slot configuration to "Your Card’ for either slot 1 or 2 (the printer or modem port), and by selecting "Built in AppleTalk’ as the option for slot 7 if you have a IIgs with ROM version 01. The LocalTalk (or alter- native) connector for that IIgs should be attached to the port assigned to ‘Your Card’ for AppleTalk. To boot over the server, you must also set slot 7 as the boot device; ‘Scan’ won't work. Chooser on To configure a boot disk to recognize the serv- the llgs is ler, you must use the System 5.0 Installer to i: ig install the appropriate support files on your boot implemented volume. if you have an 800K drive, you should inthe Control |select 'Appleshare on a 3.5 Disk’ to install the files on a copy of your System Disk. This option Panel NDA. will remove many files from the boot disk, including BASIC.SYSTEM and BASIC,LAUNCHER, in order to free enough room for the AppleShare support files. If you intend to use additional fonts, desk accessories, etc., that GS/OS expects to find on your boot volume, you are probably going to need a boot volume larger than 800K, such as a hard disk. The alternative is to use the server as the boot volume and configure it appropriately. If you boot the disk configured for AppleShare while AppleTalk is active during the boot, you will be prompted for a user name. Upon entering the Finder or another IIgs Desktop-based program, select the Control Panel NDA and click on the AppleShare icon. If a server is found, you will be asked to select the server you wish to use (in case there is more than one); in the same window your user name is dis- played to accept or modify. Once you have elected to log on, you are prompted to specify whether you are to be considered a ‘guest’ or a registered user. Answering ‘registered user’ requires you to verify your user name and enter your password. There is also a "Change pass- word’ option available if you want to alter your password periodically for more security. Once you log in successfully, you are asked to mark any server volumes you wish to access. You can also elect to save the server volume selections, your user name, and optionally your password to the disk so that you will be logged on to the server automatically when you next boot the disk. If you don't have tight rein on the disk, electing not to save the password prevents someone who has “borrowed’ your disk from logging on under your user name, On the other hand, you can easily have several "user names' for different things you do by creating several boot disks. When you close the Control Panel window after logging in, an AppleShare Icon will appear on the Finder Desktop that can be accessed as a disk drive. If you double-click on the icon to open it, you'll be presented with a window containing the files and folders in the server's volume directory. There will be some differences from a ‘standard" device; you can't drag icons from the server onto the desk- top, for example. A set of flashing arrows to the far left of the menu bar indicates communication with the network. You may also notice some file or folder names that don't follow the ProDOS FST naming conventions. On the IIgs, GS/OS interfaces to the network using a special AppleShare FST (file system translator). This FST is not confined to using ProDOS filenames so you can use Mac- like filenames of up to 30 characters and containing any ASCII charac- ter except the colon (‘:'); names such as ‘Apple //gs’ are legal on the server. In GS/OS applications, the colon will replace the ProDOS FST A2-Central 5.61 ‘? path/filename separator for any such names; you'll notice that pathnames that are displayed under ProDOS 8 as ‘/SV/ANY.USER/" will be displayed as *:SV:ANY.USER' from GS/OS applications. Be careful with using non-ProDOS names for any files you may want to access from ProDOS 8; illegal characters will be translated to question marks (‘2’) in file displays, and you won't be able to access these files. Files with illegal ProDOS names will have to be renamed when moved to ProDOS volumes. With the configured AppleShare boot disk, you can access the server volume from a lIlgs. Once you instal! System Software 5.0 on the server volume, you will also be able to boot a Ilgs from the server. You need to have read, modify, and write privileges for the SYSTEM folder on the server to install 5.0; in our case, we created a user named ‘Admin’ that the administrator could use to log in from a IIgs, giving him free rein. From the ligs, Installer was used to put the “Lat- est System files’ on the server, as well as the server volume version of the AppleShare support files (‘Server network startup’). Verify that you have any needed drivers (including printer drivers) installed on the server for all ligs configurations anticipated on the network. To log off the server, just drag it's ‘disk’ icon into the trash can. To bool the ligs from the server, do a ‘control- open-Apple- reset” (or power up the computer} while the server is active. You'll see a series of ‘moving dots’ on the text screen below the ‘Apple ligs* indi- cating the server is communicating with the ligs, and then a ‘Starting up over Mac Server’ as the server sends some additional information to the llgs. Next, you are presented with the text-based ‘Log in* screens described for the Ile Workstation software. Once you have identified yourself, the server boots you through GS/OS; the process takes less than two minutes to reach the Finder Desktop (our IIgs startup application) if you are the only user on the network. Finder will always throw you into the root directory on the server, and therefore the ‘prefix’ items we have defined arent really of conse- quence here. The user folders we designate are designed to serve as the application folder for any ‘private’ applications a user wishes to install and run on the server volume. On the IIgs, when you open a folder on the server any restrictions on your access to the current contents are displayed In the upper left- hand corner of the window. A ‘pen" with a line through it indicates you can't modify the contents of the folder. A crossed-out file folder means you can't see enclosed folders, and a crossed-out “document* icon means you can't see any enclosed files. For folders within the window, various shadings of each folder indi- cate any restrictions on your access privileges. If you have the correct privileges, access attributes for a folder can be modified from the Finder by highlighting a folders icon and selecting the ‘Icon info" item from the ‘Special’ menu. A dialog resembling a spiral-bound card deck appears, and one of the descending ‘index tabs’ on the deck is ‘Access’. Click this tab to display the current attribules; the card that appears has several hoxes with ‘pop up" menus that allow you to re- define the attributes. Pre-cefined options are. ‘Private’ (only the owner can see and modify the contents), ‘Public’ (everyone can see and modify the contents), ‘Drop folder’ (everyone can drop files into the folder, but only the owner of the folder can access them), and "Bul- letin Board" (everyone can view the contents, but only the owner can make changes). You can also customize the access privileges of “See Files', “See Folders’, and "Make Changes' for the ‘Owner, a specified Group’, and "Everyone’. Chooser on the Iigs is implemented in the Control Panel NDA. Open the NDA and locate the icon for the type of printer you want and click on the icon. You'll be presented with a list of available printers of that type, from which you can make your selection. There is only a single SYSTEM subdirectory on the server, which means that any fonts, drivers, FSTs, or other ligs system support files that need to be available to Iigs's that boot over the network will have to be installed in the appropriate place in the SYSTEM directory. To protect SYSTEM from unscheduled changes, we elected to only allow “write” access to the administrator. Unfortunately, the GS/OS printer Chooser seems to want to save information into the SYSTEM folder; we get an error telling us to contact the System Administrator every time we select the printer. We've made a habit of running Chooser every time we log on. Most of the user information is kept in a special USERS file on the server which contains a folder for each user (under the user's name). 5.62 A2-Central The user's folder hoids the SETUP folder with user settings; other net- work-aware applications can store configuration information in the user's folder, SETUP can also hold any private initialization files, such as desk accessories that users want executed only on their machine when they boot GS/OS from the network. Desk accessories and initial- ization files that should be available to all users should be placed in the appropriate place in the SYSTEM folder, of course. The organization of files on the server essentially resembles that for a normal hard disk, except that the organization should be done with the idea that certain applications should be accessible only to certain users. Our assignment of folders is intended to allow Indi- vidual users to keep ‘private’ applications on the server, as well as have access to ‘public’ information. We have set up our server '/SV/" with the following users: "Adnin” group Admin Teacher" group Dennis Took "Student" group Dennis Sally Steve Too Too “/SV/SALLY/" {s a folder on the server that the administrator has set up with (the user) Sally as the owner, and has its access set so that the following privileges are enabled: See files See Folders Make Changes yes yes no no no 0 This means that anyone else in Sallys group can see files within the folder '/SV/SALLY", but they can't see any folders. So if "SALLY’ contains the files: STARTUP BAS APPLEWORRS DIR .Q0R TT another user in the group will only see: STARTUP BAS ‘10.GROUP biol Sally can place a file in '/SV/SALLY/” such as "TO.GROUP” that other members of her group are allowed access to view and copy. Bul the goup may not make changes In '/SV/SALLY/’, including seeing oF or renaming files, or copying files.into the folder. And since the ‘See fold- ers’ option isn't enabled for the group, they can't even see the “APPLE- WORKS" folder that Sally uses. This keeps anyone but Sally (and the administrator, who knows better) from running Sally's AppleWorks. On our server, we have created a folder "ANY.USER’ for '<Any User>* that contains the common ulilities needed on the server; things like the Apple Il System Utilities, Access, Chooser, Logoff, etc. Apple's licensing for this software has a very reasonable policy of allowing it to be installed for all users on a single server. You therefore only need to purchase one copy of the software for each server in use. Current aims may work on the server if they are "Apple- Share-aware'. The AppleShare Programmer's Guide for the Apple Iigs (which also applies to the Workstation Card for the ile) classifies pro- grams as single-user (allows one person to make changes to the pro- gram's files}, multi-user (allows many users to make changes to the same data file), single-launch (only one user may launch and use the program), and multitaunch (many users may launch and use a copy of the same program). Programs that don't write to data file files should be multi-Jaunch. Examples would be many games that just ‘load and run’ and don't save player information on the disk. is that can be launched and then will write to unique data files are also multi-launch. An example is the ProDOS 8 Chooser facili- ty provided with the Workstation card; the settings are saved on. the Vol. 5, No. 8 network in a folder associated with the individual user. The same copy of the master program can be run by several users at once, but the data written will go to a unique file for each user. User information is kept on the server in the folder USERS within a folder with the user's name. This is why the user name must be a valid ProDOS name, so that the user has access to his or her own user information. Programs that write to a file assuming they wit! be the only program to access the file are single-user; an example is the classic single-user version of AppleWorks, which always writes updates for user settings to the file SEG.PR in the directory from which AppleWorks is launched. In order to use such a program safely on a network, it should be placed in a private folder belonging to (and only accessible to) a single user. Whether placing a program on a network is Jegal is subject to any terms and conditions of use for the program; you should consult the program's documentation or the manufacturer, Normally, a program should not be placed on a network in such a manner that more than one person can use it simultaneously (unless approval is explicitly given for that purpose); to do so violates the intention of copyright by providing multiple copies of a single program to several users. Multi-user Apple II programs are rare at this stage; an example would be a dalabase that allows several users to access and modify separate records in the same database file at the same time. Such a program must be carefully written to avoid loss of data. AppleShare causes some headaches with several existing pro- grams. Slot 7 also becomes the printer slot, which confuses some programs into oblivion when trying to print. AppleTalk also generates periodic signals called interrupts which cause programs unprepared for an interrupting environment to have problems in execution. The frequency of the interrupts also cause some communications pro- grams to lose incoming characters. Speed is waded for the network flexibility; as obvious by the boot time for the Ilgs, access to a hard disk via AppleShare is slower than for a local disk drive, AppleShare is not tolerant of using Reset to exit from a runaway program. If you have to hit Reset’, you'll disconnect your workstation from the server; the server will eventually log you off once it discovers you're gone, Our vision for the AppleShare office is, of course, Apple H based. Two of our ligs’systems are occupied maintaining a large cus- tomer database; these are essentially dedicated machines for data entry and generation of the self-mailers you see and other reports and forms we use. We have two Ilgs workstations used for writing the newsletter, programming, testing, and other general purposes. One IIgs also has a modem attached for getting our mail from GEnie and other services. We also have a couple of IIc’s used for other tasks. We also have a ‘computerized typesetting terminal" (it says "Macintosh* on the front, but that's a coincidence) that we use for desktop publishing of the newsletter itself. One plan we have for the network is to be able to facilitate an inter- nal electronic mail system. In addition to passing messages and files from one workstation to another via the server, we'd like to have one workstation able to dial up GEnie under program control, download our mail, identify the recipient(s), and distribute it to the appropriate people without having to have someone manually log in, grab the mail, and sort it every morning, If the system could do this just before we open for business in the morning, that would free up the comput- er with the modem for an extra hour or so each day. Another plan is to create a multi-user database so that we can have more timely access to the customer file. Currently, we are so busy working with the database that we usually can't look up items until the database hits an ‘idle’ period; these are few. While we may not want to have several people able to actually modify data in the same database, which can be facilitated with AppleShare, it would be very helpful to be able to access the current data from several ‘terminals’ within the office. If we decide to keep the data entry secured to one person, another person could call up a customer's record, make note of any orders or changes, and ‘mail’ the result to the Keeper of the Database to record the transaction. We aren't aware of current software that will facilitate these tasks, $0 we are experimenting with writing them internally. We'd be intereis- ed in hearing about any products applicable to these tasks, as well as products that could be used in the Apple Il network. -DJD Ask (or tell) Uncle DOS System Disk 5.0 As one who has eagerly awaited the final ver- sion of GS/OS version 5.0 (after testing several beta versions), | was dismayed to find that a few “kludges’ remained in that release. One of the notable ones is the lack of a straightforward way to instal] the LaserWriter print driver on a 3.5" system disk. As usual, everything works fine with a hard disk where space is no prob- lem, but try installing "Latest system files" along with a LaserWriter driver on a 3.5" disk and you get a dialog box notifying you that you need additional space to the tune of 119K! This prob- lem never occurred with System 4.0, and the logical choice of trying to delete files to gain the additional space needed was a ‘hunt and guess" method with the additional resources used by the new system. Where was that Installer script when [ needed it? Who ever invented CDEV's anyway? After the initial and subsequent bouts of frustration, here is a workaround using the Installer and three scripts for any reader who need to use a 3.5" disk and print to a LaserWrit- er First, using the Installer program install ‘AppleShare on a 3.5 Disk’. Next, remove Apple- Share (still from the Installer). Finally, install, ‘LaserWriter’. Everything fits, with about 47K remalning for additional fonts (this installation gives you only Geneva and Shaston). if you also want the direct-connect ImageWriter driver on the same disk, you'll need to delete the [WEM (ImageWriter Emulator) from the Drivers folder give yourself enough room for everything to fit. A couple of additions to the letter from Bruce Ristow ("Networks notes’, p. 5.52): | ‘wire’ my GS slightly differently. I leave slot 1 as my print- er port (for direct printing) and change slot 2 to ‘your card", slot 7 to ‘AppleTalk’ and have the SCSI card in slot 2. Via a switch box, I have both AppleTalk and a modem connected to slot 2 and, using MouseTalk for communications software, am able to access the modem without turning AppleTalk off. In addition, the startup slot can remain at ‘Scan’ for all applications. Also, the LaserWriter fonts usable by Apple- Works Classic are Courier.10 as the default font, Times.10 as Proportional-!, and Times.12 as Proportional-2. Jim Hirsch Cedar Rapids, MN 1 was wondering if anyone else out-there has had a problem renaming a backup copy of the GS System Disk 5.0. I sure did. | received my “ppy of 5.0, booted it, immediately copied the contents to another disk (cleverly named Un- titled}, ejected the System Disk, and proceeded to rename Untitled to System.Disk. Guess what, it didnt work. Is this a BUG ALERT? | tried several times but, each time after typing in System.Disk and then clicking off the icon the name changed back to Untitled. Changing the name of other disks worked just fine, and | could rename Unti- tled anything ! wanted as long as it wasn't Sys- tem.Disk. I finally changed it using Copy I! Plus, filed the original disk away and have been using my backup copy of 5.0 for about a month with no problems. Has anyone got any thoughts on why this would happen or if anyone else has had this problem, I'd like to hear about it. By the way, if you have a GS and you don't have System Disk 5.0, get it; you'll never go back. It's great. Bill Materse San Jose, CA. Finder won't allow you to change the name of a disk to the name of the System. Disk...that is, the disk you booted from. Try booting “Unti- tled’ and then changing the name.-TW Super Tech Notes We are Apple developers and we've just received our latest stack of Apple li technical notes. In the ProDOS 8 section, there are a whole bunch of neat new entries explaining everything from identifying ProDOS devices to the history of changes to ProDOS 8 and BASIC.SYSTEM. I really found these additions interesting because some of them were almost tutorials on the proper way to approach a pro- gramming problem, and some were historical in nature. If you folks don't receive the tech note updates, I suggest you find someone who does and read them. { think you will enjoy it, and [ even think your readers would find the history items interesting. Matt Deatherage and Dave Lyons are two names that I see often in the new notes, and I love their contributions. Craig Peterson Anyone who is serious about writing soft- ware for the Apple If should invest in the Apple i! Technical Notes as a necessary part of a cur- rent set of documentation, The notes cover many topics that may not be included in the manuals sitting on your sheives, as well as pro- viding specialized descriptions of concepts that Apple if Developer Technical Support has found confusing to some developers. The Tech Note package also now includes Apple li File Type notes, which contain a record of file for- mats which have been provided to Apple I DTS and which have been assigned an ‘official” file type and auxiliary type. Updates for the technical notes are pub- lished every other month, Those who don't receive the notes as part of a developer pro- gram can order them through APDA (USA 1- 800-282-2752, Canada 1-800-637-0029, Inter- national 1-408-562-3910, FAX 1408-S62- 5971). Apple I DTS also provides ligs Source Code Sampler disks with programming examples for aspiring ligs programmers. These augment the current Apple igs Toolbox Reference manuals and other programming references by provid- ing examples of many of the toolbox functions in situations that illustrate how they are used together in working programs. These are also available through APDA.-DJD A2-Central 5.63 Checking out Shrinkit In what library, under what name and num- ber, will | find Shrinki? R. W. Maytham, Jr. ‘San Bruno, CA Version 2.1 of Shrinkit is now available in the A2 RT Library (page 646) of GEnie in three forms: ‘SHRINKIT2.1.BNY" (file #7859) is an uncompressed Binary Il version, SHRINKIT2.- LXTX (file #7858) is a version that can be downloaded to a file of type TXT and EXECed from ProDOS BASIC to create the Shrinklt pro- gram on disk, and ‘SHRINKIT2.1.BQY" (file #7857) is a compressed version that can be extracted with BLU. We've also included Shrinkit on this month's disk. Shrinklt author Andy Nicholas is hard at work on academic pursuits; in his spare time he is working on a Iigs version of Shrinkit that will handle extended files but has no estimated date of completion yet. Until such a version is ready, it will be necessary to create any archives containing files with the extended storage type utilized by GS/OS as part of a full disk ‘shrink’.-DJD HyperCard library revisited | was reading the June issue of A2-Central and was caught a little off quard by your com- ments on page 5.56: ‘Apple has a HyperCard system set up in it's company library...but it doesn't include anything as useful as a list of the magazines actually in the library's collec- lions...". This is not the case. Our Library Tour stack does indeed have a complete listing of all 650 periodicals in our collection as well as a complete list of all our books, video tapes, user Group newsletter and other library materials including their call numbers. | agree that it wouldn't be very useful without this informa- tion. The only reason I can think of that you might have this notion in that you may have looked at a demo version which does not include all the fistings (but a note does pop up when you attempt to look at the listings telling you that this is a demo version and not the complete version). Did you come by our library? I have attached a copy of a couple of screen dumps from the stack for your information. I hope this information clears up some mis- conceptions about our stack. Monica Ertel Manager, Apple Library Cupertino, CA Er, ah, my apologies. { did indeed visit your library in February. Based on the screen print- outs you sent in your letter, | think I must have simply overlooked the button for getting to the ‘card catalog’-TW ADB cable length A teacher that | know recently decided he would like to computerize his grading records. The only problem he had was that his comput- er, an Apple igs, was in his office, and therefore. he could not enter the grades from his class- room. He posed me with the question of whether or not you could get a 90 foot key- board cable so that he could just place a moni- tor and keyboard in his classroom and use the computer in his office. As a result of this, | con- tacted you some time ago to see if you had any ideas. In your reply you said you werent really sure and would like to hear from me if we got this working. Well, we did get it working, and 5.64 A2-Central the solution was rather simple, About the same time | contacted you, | also contacted Redmond Cable. They said they had the proper connectors for the keyboard cable and could make one, but highly doubted that it would work. Since they only charge a 15% restocking fee for returned items, we decided to go ahead and have them make a cable. When it arrived we tested it otit immediately, and it worked just fine. We have yet to experience any flaws. As far as a 90 foot video cable goes, we had one made at a local Radio Shack, and it, too, has worked beautifully. Now, by simply daisy chaining his two key- boards and plugging the ‘monitor into the monochrome port, it allows him to use the grad- ing program Im making for him with Apple- Works and UltraMacros from within his class- room without having to pay the expense for a workstation. Steve Bilgrien Iron Ridge, WI 90 feet exceeds Apple's recommendation for the Apple Desktop Bus cabling length, but if it works we wont tell the computer any dif- ferent, This type of “extension terminal’ is a cheap substitute for a network if a single CPU is adequate. For the record, The Apple llgs Hardware Ref- erence, page 118, specifies ‘Cables should be no longer than 5 meters, and total cable capac- ilance should not exceed 100 picoFarads per meter.“DJD A? Central : © Copyright 1989 by A2-Central Mos: rights resewed. Al prowans pubished in A2Ceatral ave publ domain and mey be copied anc sisted witout charge. Apple user grup and sigrifcart thors ay obtn permission to rape ees rom tne to ime by secre wren request Edie by Dennis Doms wth hep om: Tom Weishear SallyDwyer Dean Esmay Joyce Hammond Steve Kelly Jay Jennings Tom Vanderpool Jean Weishaar A2Central tied Open-Apple brxgh January, 1989—has been pub- lished rohly since danvary 1985. Word wide oes (6 US. cokes; aral every inched tno asdicnal charge) $28 fx | yea, $5 for 2 years, $78 fr 3) yeas. Al ack ssues are cues avalabe fr $2 ear bound, come od fons of or frst four volumes are $1495 each, Volumes end withthe Jarry issue an dex the pr woe is inked wih he February ise, The lon of easissu 0] A2-Centralsavekale on 35 ds, 09 wth a selection of the bes: ram pute domain anc shareware fles an pro- agra, for $84 a year newsletter and disk combined) Single is aro $10. Prease send al conessonderce to: A2-Central P.O. Box 11250 Overland Park, Kansas 66207 U.S.A. A2-Central sso in an unprotected forma! for your conwenienca, You ars scmuapd io make bap aval copes oes ead eared ‘copies for your own use without charge. You may also copy A dtibunon io others. The datuio on 15 ns pet ap peony fribuied. WARRANTY AND LIMITATION OF LIABILITY, | warrant hat most ofthe ‘rforration in AZ-Cemtral useful and comect, although dive and ms takes ave Inchded from time ome, usualy Urintenfcaly, Unsatfed subscribers may cancel ther subscrpion al any tine and receve a fil refund of tei ast subscrston peyment. The wailed pation of any paid ssubscriofon wil be Telunded even to satisfied subscribers upon request MY LIABILITY FOR ERRORS AND OMISSIONS 1S LIMITED TO THIS PUBLIGATIONS PURCHASE PRICE. In ro case shall | or my cortnbutors be liable for ary inodenial or consequential damages, nor for ANY dem ages in excess ofthe fees paid by a subscribes. SSN 0885-4017 Ene mail: A2-CENTRAL Voice: 913-460-5502 Printed in the U.S.A. Fax: 919-460-6807 AppleWorks 3.0 upgrades Like everyone else, I'm stunned. An improved version of AppleWorks - the specs and enhancements make great reading. | want a copy. I rang Apple Australia; the Claris distribu- tor In Australia (Dataflow); then a couple of friends (also A2-Central subscribers). Looks like we are not eligible down here. One friend had actually managed to-get an upgrade to version 2.1 of AppleWorks from Claris in USA, but said he would not try it again - too many problems as Claris will not ship goods outside of the USA. Trevor Drover Young, NSW Australia I read about AppleWorks 3.0 in the July issue of A2-Central and it made my mouth ‘water... BUT is that upgrade offer valid also outside the United States? Does it apply to all versions of AppleWorks (I have old faithful 1.2)? | once tried to update to AppleWorks 2.1 and Claris told me that they definitely would not ship outside the United States. If I'd provide a shipping address within the States all would be fine, but no shipping abroad. Udo Huth Wittmar, West Germany Will Claris make AppleWorks 3.0 upgrade to Canadian subscribers as outlined in your flyer? Ronald J. White Willowdale, Ont. Canada I knew it was too good to be true. | sent in my coupon for the $99.00 offer as soon as I got the July newsletter and yesterday | got a letter from Claris. Please check out the enclosed copy. Since you did not mention in the newsletter that the AppleWorks 3.0 upgrade offer was only good in the United States, | wonder if this was your intention or something that Claris decided without your knowledge or consent. As you see, Claris suggests paying the full Japanese price for this which may well be 2 to 3 times the list price in the US, not a cheerful prospect. (I have not verified the price here, but this is only because I have not yet had the chance.) [f possible, please help. Bill Robbins Osaka, Japan According to the AppleWorks Upgrade Order Form we received, the AppleWorks 5.0 upgrade is good for any previous version of AppleWorks (1.x or 2.x) or even from Apple Writer. You must enclose your original disk for the upgrade price of $79 unless you have reg- istered your copy of AppleWorks with Claris. We are sory for any confusion among inter- national readers; we didnt anticipate the varia- tion in handling the upgrades for Claris's inter- national offices. If available, upgrades for those outside the USA should be handled by the appropriate Claris office; try contacting your iocal office first. If you don't know who to contact, the advice is to contact Claris’s corporate office via mail: Claris 5201 Patrick Benry Drive Box 58168, MS: Cll. Santa Clara, CA 95052-8168 Claris will notify you of the appropriate office. We have since established that outside the Vol. 5, No. 8 USA, the $99 ‘no original disk’ upgrade will only be available in Canada and Australia. Claris acknowledges the wide appeal of AppleWorks 3.0. We have received an upgrade announcement as part of a user group mailing, and the ‘AppleWorks 3.0 Product Fact Sheet" included in the mailing boldly proclaims that ‘Small business owners can use AppleWorks 5.0 for their overall office management..." -DJD More on Works to Works Please send me more information about the Apple File Exchange Translator that translates from AppleWorks to MicroSoft Works. Do you know where I can obtain a copy? Do you know of any product that translates MicroSoft Works to AppleWorks? Carol S, Holzberq Shutesbury, MA The AppleWorks 3.0 offer seems a great time for bootleg owners to go legal. Maybe this was the idea- sort of like overdue library book amnesty days. If 1 read the reviews correctly, | think 3.0 is a better choice than AppleWorks GS for GS users. The pros and cons of each might make an inter- esting article. No one in town- not even the Apple dealer- will hook up a ligs to a laser printer for printing services. it looks like what we need is a ligs pro- gram that will write Mac-compatible files so the Mac people can print them for us. I don't know when we'll ever afford a laser printer, especially with lgs support and programs as lacking as they are. Martin D. Paquette Sebastopol, CA Several people have told us an AppleWorks to Microsoft Works translator is available from some Apple Educational Dealers as well as on some information services, Sure enough, we found it in the Mac Library (page 606) on GEnie as ‘AFE/WORKS.SIT’ (file #9710). You'll need the Macintosh file archive utility Stuffit to unpack the downloaded file on a Macintosh The name of the utility is Works to Works Transporter. from Productivity Software, Inc., which wrote MicroSoft Works for MicroSoft. It allows you to convert AppleWorks spreadsheet, word processor, and database files to Microsoft Works format on the Macintosh. Works to Works is used in conjunction with Apple File Exchange, which is available from your Apple Dealer or licensed distributor as part of the Macintosh System Software utilities. To use the translator, just drop it in the fold- er with Apple File Exchange. Start up Apple file Exchange and insert your 3.5" ProDOS disk with the AppleWorks files; a ‘ProDOS->Mac’ menu item will appear. Pull down the menu and select the AppleWorks to Microsoft Works translation. Then select your AppleWorks files to copy and click on the ‘Translate’ button near the center of the screen to translate the files. We dont know of a utility to make the trans- lation in the other direction. One would think an AppleWorks to MacWrite and back transla- tor would be at the top of the ‘to do’ list at Claris, but they've let Microsoft take the lead here.-DJD