Loading…
Text content (OCR)
@.
Network Products
Installer
@ Apple Computer, Inc.
This manual and the software described in it are copyrighted, with all
rights reserved. Under the copyright laws, this manual or the software
may not be copied, in whole or part, without written consent of Apple,
except in the normal use of the software or to make a backup copy of the
software. The same proprietary and copyright notices must be affixed to
any permitted copies as were affixed to the original. This exception does
not allow copies ro be made for others, whether or not sold, but all of
the material purchased (with all backup copies) may be sold, given, or
loaned to another person. Under the law, copying includes translating
into another language or format.
You may use the software on any computer owned by you, but extra
copies cannot be made for this purpose,
‘The Apple logo is a registered trademark of Apple Computer, Inc. Use of
the “keyboard” Apple logo (Option-Shifi-k) for commercial purposes
without the prior written consent of Apple may constitute trademark
infringement and unfair competition in violation of federal and state
laws.
© Apple Computer, Inc. 1990 Finder is a trademark of Apple
20525 Mariani Avenue Computer, Inc.
e ino, CA 95014-
se re ai “4 SONEon? Simultaneously published in the
United States and Canada,
Apple, the Apple logo,
AppleShare, AppleTalk,
EtherTalk, Macintosh, and
TokenTalk are trademarks of
AppleComputer, Inc.
Welcome to the Network
Products Installer
This document tells you how to use the accompanying
Network Products Installer disk, which you must use to
install the following network software products onto
Macintosh™ IIci or Macintosh IIfx computers:
= AppleShare™ Apple™ II Support
= AppleShare File Server
= AppleShare Print Server
= AppleTalk™ Internet Router
= EtherTalk™
= SMB File Transfer Utility
= TokenTalk™
The Network Products Installer does not provide an
update to these products or change these products in any
way. It simply installs them on your Macintosh correctly.
The disk in this package does not contain any of the
products listed above; you can purchase these products
from your authorized Apple dealer.
we
A few notes before
you begin
When running the Network Products Installer, you will
be asked to insert the product disks into your Macintosh.
You should make sure they are handy before launching
the Network Products Installer.
If you have questions about installation procedures that
aren't addressed by this document, refer to the
networking manuals that came with the network
products you are installing.
The next section, “Installing Software,” provides step-by-
step instructions for using the Network Products
Installer. For additional information related to specific
network products, read the section “Product Notes,” later
in this manual.
= EtherTalk users: If you need to install EtherTalk 1.2
because of your network configuration, you must first
install EtherTalk version 2.0 or later by following the
steps in the section “Installing Software.” EtherTalk
versions 2.0 and later are available as free upgrades
from your authorized Apple dealer. After installing
EtherTalk 2.0 or later, read the section “Product
Notes” for specific instructions on installing
EtherTalk 1.2.
= TokenTalk users: If you are installing TokenTalk, first
check the contents of your TokenTalk Installer disk to
see if you have a folder called Token Talk Installer. If
you do not have this folder, then you're ready to install
TokenTalk.
Network Products Installer
If you do have a folder called Token Talk Installer,
check to see if the Token Talk Installer disk is locked. If
it is locked, unlock it. Then drag all of the folder’s
contents onto the Token Talk Installer disk icon. Finally,
drag the folder to the Trash; you can then begin
installing TokenTalk.
Installing software Make sure you have the product disks nearby; you need
them to do the installation. Also, check that the
Macintosh IIci or Macintosh IIfx disk onto which you
are installing has system software version 6.0.5. If it
doesn’t, see the manuals that came with your computer
for instructions on installing system software.
1. If your computer is already on, choose Shut Down
from the Special menu.
2. Insert the Network Products Installer disk into a
floppy disk drive.
3. Turn on your Macintosh.
4. From the Finder™, select and open the Network
Products Installer disk. The Network Products
Installer window, shown in Figure 1, appears.
Installing software 3
SSS Network Products instoler err
S iter Eas ick 157K avaiable
‘System Folter
Tesch Tent
a
Figure 1 The Network Products Installer window
5. Select and open the Installer icon.
After a short pause, the Installer’s opening display,
shown in Figure 2, appears.
fee ten Welcome to the Apple Network Products
watater
This ase wel ses coe ne ncn aT cee
dak testers
AppleShare Apple II Support EtherTalk
‘Appleshare File Server SMB File Transfer Utility
‘AppleShare Print Server TokenTalk
AppleTalk Internet Router
‘You must have already
Purchased these products ff
an authorized Apple Dealer: they do not come with
Macintosh.
c=3
Figure 2 The Installer's opening display
Network Products Installer
6. After reading the opening display, click OK.
The Installation dialog box, shown in Figure 3,
appears. Note that you will not have the option of
using Easy Install, as you did when installing system
software.
‘CHICK the Items you want to select;
Shift-click to select multiple items.
Rpploshare Apple 11 Support v2.0.1) |
Appleshare File Server (v2.0.1)
Appleshare Print Server (u2.0)
AppleTalk Internet Router (v2.0)
EtherTalk (02.0)
SMB File Transfer Utility (v1.0) ‘© Hard Disk
Tokentotk (v2.0)
Eject Disk
ll
iE
Figure 3 The Installation dialog box
7. Select the disk onto which you want to install the
software.
Change the currently selected disk by clicking the
Switch Disk button.
Installing software
w
8. Select the products you want to install.
When you select a product, an information box
appears, as shown in Figure 4. To select more than one
product, hold down the Shift key as you click each
product. Make sure you have selected the correct
products.
Important: If the Install button remains dimmed when
you select a product, check to see that the disk onto
which you are trying to install software is unlocked, is
not an AppleShare volume, and is not the Installer
disk.
Click the items you want to select;
Shift-click to select multiple items.
‘SMB File Transfer ‘© Hard Disk
TokentTatk (v2.0)
Tae
Plea simaesere
A ie coe mes penta Phe ere
Polopeafieratoamengaesther A pabre
fateh bpec orem
pire
Laie CRD ALL TATE |
Figure 4 The Installation dialog box with information box
A Warning: Be sure you have selected the correct
products before you click Install. Choosing an incorrect
product may force you to abruptly stop the installation
and reinstall all system software. &
Network Products Installer
9. Click Install.
After you click Install, you might see a dialog box
similar to the one shown in Figure 5. This dialog box
appears ifa file on your hard disk is newer than the
file currently being installed. Always click Newer to
ensure that you keep the newer file.
The file “Responder” already on “Hard
Disk” is newer than what you are about
to install. Click Newer to keep the
newer file, Older to replace that file, or
Cancel to leave the disk “Hard Disk”
untouched,
Figure 5 The Newer/Older dialog box
Your Macintosh ejects the Network Products Installer
disk and requests the product disk by displaying a
dialog box similar to the one shown in Figure 6. Keep
the Network Products Installer disk nearby because
you need to insert it again later in the installation.
Please insert the disk:
EtherTalk Installer
Figure 6 The Disk Request dialog box
Installing software
While the Installer installs the software, a Status dialog
box similar to the one shown in Figure 7 keeps you
informed of its progress.
A Warning: Clicking Stop at this point will abruptly stop
the installation, and may result in an incomplete set of
system software on your startup disk. If you are sure you
want to stop the installation, be aware that you may have
to completely reinstall all system software. See the next
section, “Clicking the Stop Button To Stop Installation,”
for more details. &
Reading from:
Network Products installer EtherTalk installer
Installing onto the disk “Hard Disk”
Closing files...
a ] (stop 7}
Figure 7 A sample Status dialog box
Network Products Installer
When the Installer finishes installing the product, it
displays a dialog box similar to the one shown in
Figure 8.
Installation on “Hard Disk” was
successful. If you are finished, click
QO Quit to leave the Installer. If you
want to do additional installations,
click Continue.
Figure 8 The Continue or Quit dialog box
10. Click Continue or Quit.
If you click Continue, the Installer takes you to the
Installation dialog box. Go back to step 7 to change
the currently selected disk or to step 8 to select the
products you want to install, and continue until
you're finished.
Installing software
11. Choose Restart from the Special menu.
After your Macintosh has restarted, the installation
is complete. For information on using the product,
refer to the product manual.
+ Note: If you need to install EtherTalk 1.2, or if you
installed AppleShare File Server, AppleShare Print
Server, SMB File Transfer Utility, or TokenTalk on
your computer, be sure to read the section
“Product Notes,” later in this manual, for
instructions specific to these products. +
Clicking the — If you click the Stop button when you see the Disk
Stop button to Request dialog box (see Figure 6) or the Status dialog box
stop installation (see Figure 7), the dialog box shown in Figure 9 appears,
Stopping now may result in an incomplete
set of software on “Hard Disk.” Click
Resume to continue the installation or
Stop if you are sure you want to stop.
Figure 9 The first Stop dialog box
If you clicked Stop by mistake, click the Resume button.
The Network Products Installer then continues installing
the product you have selected. Jf you do not click Resume
at this point, you may have to reinstall all system software.
Network Products Installer
Product notes
If you must stop the installation (because, for example,
you've selected the wrong product), click Stop. The
dialog box shown in Figure 10 appears.
Installation was stopped before it
Wy) was completed. The disk “Hard
Disk” may not be a usable startup
Figure 10 The final Stop dialog box
Because the abrupt termination may result in an
incomplete system and an unusable startup disk, you
should reinstall system software after clicking OK to
ensure that you have a fully functioning system. Refer to
the manuals that came with your computer for
instructions on installing system software.
= AppleShare File Server: The Network Products
Installer is required only if you need to install
AppleShare server software. To install the AppleShare
Macintosh workstation software, refer to the
AppleShare File Server User's Guide.
When you use the Network Products Installer to
install AppleShare File Server, it also automatically
installs the Admin application from the AppleShare
Server Administration disk and puts it in the Server
Product notes i
folder. Be sure to run Admin after restarting to
complete the file server installation; refer to the
AppleShare File Server Administrator's Guide.
A Warning: Do zor use AppleShare File Server version
2.0.1 or earlier on a Macintosh Portable. Even though
the Network Products Installer will work on the Portable,
you might lose data if you use it asa file server. &
= AppleShare Print Server: You should make sure that
the print server and workstations on your network are
all using the same print drivers. Using different print
drivers will cause delays while the printer initializes
itself for the new drivers.
= EtherTalk 1.2: To install EtherTalk 1.2, you must first
install EtherTalk version 2.0 or later according to the
steps under “Installing Software,” earlier in this
manual. When the Network Products Installer has
finished, insert the EtherTalk Installer disk. Open the
Previous Version folder. Drag the EtherTalk icon into
the System Folder of the disk onto which you're
installing EtherTalk 1.2. You can remove the 2.0 or
later version of EtherTalk or leave it in your System
Folder to keep it available. To remove the 2.0 or later
version, drag its icon out of the System Folder and
into the Trash.
12 Network Products Installer
= SMB File Transfer Utility: To use this product, you
must also install Apple File Exchange 1.1.3, which is
on system software version 6.0.5 Utilities 2 disk. Drag
the Apple File Exchange folder onto the disk on which
you just installed SMB File Transfer Utility.
= TokenTalk: The TokenTalk NB Card Confidence
Test runs only from system software 6.0.3 floppy disks
on Macintosh II, IIx, and IIcx computers.
A Warning: Do not use the TokenTalk NB Card
Removing software
Confidence Test with a Macintosh IIci or Macintosh IIfx.
Any diagnostic results you obtain will be inaccurate. In
addition, using the confidence test with some computer
configurations may cause your system to freeze, requiring
you to restart your computer, &
You can also use the Network Products Installer to
remove software from your Macintosh. To do so, follow
these steps:
1. Go to the Installation dialog box.
You get to the Installation dialog box by following
steps 1 through 6 in the section “Installing Software.”
2. Select the product you want to remove.
To select more than one product, hold down the Shift
key as you click each product.
Removing software B
3. Hold down the Option key.
When you hold down the Option key, the Install
button changes to the Remove button, as shown in
Figure 11.
‘Appleshare Apple 11 Support (v2.0.1)
Appleshare File Server (v2.0.1)
Appleshare Print Server (v2.0)
AppleTalk internet Router (v2.0)
( Remove _}
‘SMB File Transfer Utility (v1.0) ‘© Hard Disk
UI
CE)
| emu
[caer iat:
| The taster copies software from the “EtherTatkinctaller” |
Gepeaceormatnene |
eeeomammanit oat
a |
J
Figure 11 The Installation dialog box showing Remove button
Network Products Installer
4. Click Remove.
When the Installer is finished, it displays a dialog box,
as shown in Figure 12.
Removal from “Hard Disk” was
successful. If you are finished, click
wy) Quit to leave the Installer. If you
want to do additional installations
or removals, click Continue.
Figure 12 The Continue or Quit dialog box
5. Click Continue or Quit.
If you click Continue, the Installer takes you to the
Installation dialog box. Go back to step 2 and
continue until you're finished.
6. Choose Restart from the Special menu.
Removing software 5
The Apple Publishing System
This Apple™ manual was written and
edited on a desktop publishing system
using Apple Macintosh™ computers
and Microsoft Word. Pages were
composed in QuarkXPress. Proof
pages were created on the Apple
LaserWrirer™ printers. Final pages
were output directly to separated film
on a Linotronic 300. PostScript, the
LaserWriter page-description language,
was developed by Adobe Systems
Incorporated.
Display type is Apple's corporate font,
a condensed version of Garamond.
‘Text type is Adobe Garamond.
Ornaments are ITC Zapf Dingbats.
Apple Computer, Inc.
20525 Mariani Avenue
Cupertino, California 95014
(408) 996-1010.
TIX 171-576
2030-3916-A