If it's old enough to use Resistor SIPP packs, then you want the 220/330 networks. The 110ohm resistor packs won't provide good termination. When one measures the resistance into the 220/330 networks, the combination of series and parallel resistances show approximately 110 ohm, which has a lot to do with why folks think that will work, but it's not a good termination solution.
This is the kind of thing you need:
http://www.ebay.com/itm/230885118855?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
But you probably need the 4611X series, since you said you have 11 pins.
There's a thread around here somewhere where I posted a much more detailed discussion on this topic. It's the one where I go on for a while about the Bourne 4610 series vs. some other series and related matters.
Look at this article:
https://www.bourns.com/pdfs/scsitermap.pdf
This is the kind of thing you need:
http://www.ebay.com/itm/230885118855?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
But you probably need the 4611X series, since you said you have 11 pins.
There's a thread around here somewhere where I posted a much more detailed discussion on this topic. It's the one where I go on for a while about the Bourne 4610 series vs. some other series and related matters.
Look at this article:
https://www.bourns.com/pdfs/scsitermap.pdf