I have a question about my Maxtor 7120SR (external) HD...
This 120MB drive has been working perfectly in an external case using an external terminator. I usually keep the SCSI ID set to 5 because I use it for installations back and forth with three other computers.
I changed the SCSI ID to 0, removed it from the case and temporarily installed the drive internally in one of my SE's. Then I removed it, installed it back into the external case and set the ID back to 5 again. However, now when I connect the drive to another computer is still shows ID=0 for some reason. Is there another way to get the drive changed back to ID=0?
This 120MB drive has been working perfectly in an external case using an external terminator. I usually keep the SCSI ID set to 5 because I use it for installations back and forth with three other computers.
I changed the SCSI ID to 0, removed it from the case and temporarily installed the drive internally in one of my SE's. Then I removed it, installed it back into the external case and set the ID back to 5 again. However, now when I connect the drive to another computer is still shows ID=0 for some reason. Is there another way to get the drive changed back to ID=0?