Update:
Correction... there are no collisions when pinging either from the 192.168.1.100 to ...1, ...199, or ...200.
at the time I am writing this .200 (G3bronze) is connected to the 10 Base-T network.
I am begining to wonder if the error is originating the airport express router.
The Mini EN/SC 10T registers network activity when ...100 pings out. The Linksys Hub registers activity on Act/Rx and Link/Tx from on both ...100 and through the uplink. The Link/Tx flashes on .200, but Act/Rx on .200 does not register any activity.
The switch appears to register at both ends, but I can't really tell.
Anyhow... lets have at it.
K
Correction... there are no collisions when pinging either from the 192.168.1.100 to ...1, ...199, or ...200.
at the time I am writing this .200 (G3bronze) is connected to the 10 Base-T network.
I am begining to wonder if the error is originating the airport express router.
The Mini EN/SC 10T registers network activity when ...100 pings out. The Linksys Hub registers activity on Act/Rx and Link/Tx from on both ...100 and through the uplink. The Link/Tx flashes on .200, but Act/Rx on .200 does not register any activity.
The switch appears to register at both ends, but I can't really tell.
Anyhow... lets have at it.
K