Doesn't the Apple CD 300 Plus jumpered for termination power solve the termination power issue on the chain - or to the bus I guess?
I'm also fairly sure I tried a proper termination setup. I put a properly terminated drive in an external enclosure and kept this one internal with no Termination enabled, but I think jumpered to ID1. It didn't make a difference.
It's also worth noting that Drive Setup takes a very long time (to the order of several minutes) to come up with those lists. It normally does not do that. I understand your point about the "<no disk>" possibly reflecting termination - but those sounds alongside?
-- Silverlining couldn't read the drive and gave an error when I tried to format it. Although the Short Tests on Silverlining did pass. It seems to be stuck on the long tests (I force quit after about 10 minutes). --
I'm also fairly sure I tried a proper termination setup. I put a properly terminated drive in an external enclosure and kept this one internal with no Termination enabled, but I think jumpered to ID1. It didn't make a difference.
It's also worth noting that Drive Setup takes a very long time (to the order of several minutes) to come up with those lists. It normally does not do that. I understand your point about the "<no disk>" possibly reflecting termination - but those sounds alongside?
-- Silverlining couldn't read the drive and gave an error when I tried to format it. Although the Short Tests on Silverlining did pass. It seems to be stuck on the long tests (I force quit after about 10 minutes). --