Skip to main content
Home Forums 68kMLA FC0-FC2 680x0 Bus Signals Needed? — #22
Post #22 by Trash80toHP_Mini
Source Forum68kMLA
CategoryTroubleshooting
Post DateFri, 19 Aug 2011 - 20:04
Original URLhttps://68kmla.org/bb/threads/fc0-fc2-680x0-bus-signals-needed.23694/
Post
EtherNet SchmeeeetherNet! }:)

For the I/O Field of Dreams Card:

;) Design the card with the PBX Bridged '030 headers w/cable driver ICs on the corner for the 1400's T-Rex enabled PCMCIA Card Cage to implement PCMCIA WiFi, lowly EtherNet or any other available card option . . .

. . . with IR-Talk garnish! [:D] ]'>

This would be cable mounted to stick out the backplane plate of the SE/30 and IIsi along with your HD-15 Ribbon Cable Connector or, alternately, with the Card Cage sitting directly on the DreamCard's Headers and facing out the HDD Cubic of a 2300c or a 68k Duo . . . I'll figure out a place for the HD-15 cable, or a DIP Header Cable for VGA & ADB later . . .

. . . DreamCard in Sub-Terranian Hack Mode for the Duos, of course . . . :approve:

. . . while you're at it! :o)

p.s. you might want to take a peek at some of the interesting support features on the IIfx ROM to add in as well. I was surprised to see (presumably the IIci's Vampire Video) "Mac II Video" sitting on one of my pet IIfx's PseudoSlot Addresses in SlotInfo. The IIfx ROM's bits might provide for more and better slot interfacing/addressing capabilities! [}:)] ]'>

mp.ls