Finally this project takes an step ahead. Actually, i am supposed to clean out lots of stuff i keep at work, so i took these units to home and started the modification. This is been done before, but i have lost the link, need to find it again.
It's quite easy mod, need to cut some plastics under the motherboard and the back panel. The screw in the middle fits perfectly after removing the back panel and the motherboard fits where it should be.
The PSU fits easily as well the HDD+3.5" disk drive-bay as well. Obiously need to leave out the cd-rom drive unless start to get really creative
(i have few ideas..).
I have an PPC-card for the Quadra as well and pile of RAM, need to try if they work. Originally this Quadra was equipped with the Radius LeMans GT NuBus-card.
It's quite easy mod, need to cut some plastics under the motherboard and the back panel. The screw in the middle fits perfectly after removing the back panel and the motherboard fits where it should be.
The PSU fits easily as well the HDD+3.5" disk drive-bay as well. Obiously need to leave out the cd-rom drive unless start to get really creative
(i have few ideas..).I have an PPC-card for the Quadra as well and pile of RAM, need to try if they work. Originally this Quadra was equipped with the Radius LeMans GT NuBus-card.