It's probably Acrylic Cement, same MEK base as PVC and ABS or PVC/ABS cements at your local home improvement emporium. Could be straight MEK or MEK with clear ABS dissolved in it, like the way you make or thicken arcylic cement.
MEK is at the nasty end of the Ketone family, acetone, the simplest form of Ketone, is bad for you in many ways, but it's a naturally occurring bodily byproduct, run through the kidneys and out you know where. Just don't breathe it, ingest it, or get it on your eyes and try to keep it off your skin as much as possible in its straight form.
While a chemical weld in plastic sets faster than Cyanoacrylate (crazy glue) does, it doesn't achieve full strength as quickly. It really needs to cure overnight, sometimes more, depending upon the surface area/margin widths fused.
Plexi fabrication 101, same bottle used, pointed water color brushes or glass syringes with real hypodermic needles for fine work. [}
] ]'>
MEK is at the nasty end of the Ketone family, acetone, the simplest form of Ketone, is bad for you in many ways, but it's a naturally occurring bodily byproduct, run through the kidneys and out you know where. Just don't breathe it, ingest it, or get it on your eyes and try to keep it off your skin as much as possible in its straight form.
While a chemical weld in plastic sets faster than Cyanoacrylate (crazy glue) does, it doesn't achieve full strength as quickly. It really needs to cure overnight, sometimes more, depending upon the surface area/margin widths fused.
Plexi fabrication 101, same bottle used, pointed water color brushes or glass syringes with real hypodermic needles for fine work. [}
] ]'>