7300 7500 7600 8500 8600 Video Driver

7300/7500/7600/8500/8600 Video Driver http://web.archive.org/web/20060906210619/http://vision.n... The Wayback Machine - http://web.archive.org/web/20060906210619/http://vision.nyu.e… VideoToolbox 7300/7500/7600/8500/8600 120 Hz Video Driver VideoToolboxPsychToolbox Tips Search about advice bugs changes contents download October 2, 1997 hi nano i just discovered another unexpected behavior in your Resolutions Control Strip, which may be just another manifestation of the problem that Brian Stankiewicz reported. I just bought a $4,500 grayscale monitor (the BrightView) that will synch to almost anything. Supposedly it supports the new DDC "plug'n play" digital communication standard. It has the fancy new DDC "plug'n play" 15-pin HD connector. From Griffin, I bought an HD-15 to HD-15 cable and a "plug and play" adapter. This works, but seems to identify the monitor as an old-fashioned 480x640 fixed-frequency monitor. when i boot up my 7500/100 with your new video driver and this monitor (with the Griffin adapter) and Mac OS 7.6.1, your new modified Resolutions control strip offers only 480x640 67 Hz in roman type (recommended) and all the others (including 640x480 120 Hz) in italic (at user's discretion). Apparently the boot-time identification fails to identify my monitor as DDC-compatible. If, instead, I boot up with my Apple 17" multisynch then I get offered the wide range of resolutions I know and love. Since the Mac OS identifies the monitor type only at boot time, I can, after booting, manually transfer the connection to my new monitor (with the Griffin adapter) and everything works fine. Your control strip offers me all the options, and they all work. best denis September 16, 1997 Nano's new driver worked fine for me on my PowerMac 7500 running Mac OS 7.6.1 driving an Apple 17" Multiscan. (The image was about 0.5" to the left of center; about 10 pixels were cut off at the left. This can be corrected by using the monitor's horizontal offset adjustment.) Frans Cornelissen reports that the new driver and control panel work fine on PowerMac 8600 running Mac OS 7.5.5 driving an Apple 20" Multiscan. Brian Stankiewicz says "I tested the new graphics driver on our 8500/150, and it worked fine with our Apple Multiscan monitor." 1 of 7 5/5/24, 6:18 PM 7300/7500/7600/8500/8600 Video Driver http://web.archive.org/web/20060906210619/http://vision.n... Brian Stankiewi…