Activation Update Read Me

Installation and Activation Note NOTE: Earlier versions of Red Giant and Trapcode plug-ins have used different registration methods, either within the plug-in itself or within an older installer. The instructions below de- scribe the new installer registration. DEMO USERS: If you have previously used the plug-in in demo mode (did not enter a serial number), then you must reinstall the plug-in to activate the plug-in you purchased. Steps 1) Make sure a compatible host application is already installed You must have already installed the host application: Adobe After Effects version 6.5, 7.0, or CS3. Please check www.redgiantsoftware.com for the latest compatible host versions. 2) Run the plug-in installer Your new plug-in comes packaged as a complete software installer, which will automatically place the required components on your hard drive and guide you through the process of installing the plug-in. 3) Activate The final installation step is entering your serial number into the registration dialog, which will appear the first time you run the installer. YOU MUST ENTER A SERIAL NUMBER TO USE YOUR PLUG-IN IN AUTHORIZED MODE. You should have received a confirmation email after your pur- chase that contains your serial number. (continued on the next page) The serial number for your plug-in appears in the following format: AAAA #### #### #### #### The activation code is a series of 20 characters. You must enter all digits. You can also choose to run the software in demo mode simply by leaving the fields blank. Demo Mode If you choose Demo on installation, the plug-in will run in demo mode until you enter a serial num- ber. Output will contain a red "X" across the image in both previews and final renders. If you should wish to register the plug-in after trying the demo, you do not need to uninstall the demo version: sim- ply run the installer again and enter a valid serial number.