MIDIMAN Macman
MIDIMAN Macman
Game Manuals · PDF
| Filename | MIDIMAN_Macman.pdf |
|---|---|
| Size | 0.47 MB |
| Subsection | MIDIMAN Macman |
| Downloads | 1 |
Enjoying MacTrove?
Anonymous downloads are free and unlimited.
Create a free account to track favorites,
contribute metadata corrections, and join the
community chat.
Reader
Loading…
OCR / Text contents
1 Macman ™ MANUAL
Version MAC051199
MACMAN ™
MACINTOSH MIDI INTERFACE
The Macman MIDI Interface allows your Macintosh computer to
send and receive MIDI.
If your sequencing software does not include a "MIDI
Manager," you will need to acquire Apple's MIDI Manager or
Opcode's OMS. Both of these are a free download from either
company's website (apple.com or opcode.com).
In almost all cases the Macman does not need power because it
can draw current from the Mac itself. However, some Mac com-
puters, like the Powerbook 500 series, cannot supply enough
power. In this case the Macman has a power connector on the
side for use with an optional 9 volt dc adaptor.
To install the Macman connect the included serial cable into the
Serial In connector on the Macman. Plug the other end of the ser-
ial cable into either the modem or printer port of your Mac --
either port can be used. Just make sure the MIDI program you
are using is set to the same port into which your Macman is
plugged. Macman does support both the new 9 pin serial GEO
port and the old standard 8 pin serial port.
Macman operates in MIDI mode when the INTERFACE/THRU
switch on the right side of the unit is pressed In AND a MIDI
application is being run. When the unit is properly activated in
this fashion, the red POWER LED will light, indicating that you
are in MIDI mode. The Macman is now able to send and receive
MIDI when addressed by a standard MIDI application.
Macman Hook-Up Diagram
From Mac
To Synthesizer or Sound From Synth To Modem
Modem or
Module MIDI Ins MIDI Out or Printer
Printer
▲ ▲
▲ ▲ ▲ ▲
OUT OUT OUT IN OUT IN
MIDI SERIAL
INTERFACE/ THRU
MACMAN
9VDC (OPTIONAL)
▲
▲
MACINTOSH MIDI INTERFACE
LED
1 IN ▲ OUT ▲ POWER▲
The MIDI Data In and Out indicator LEDs are only operational
when the INTERFACE/THRU switch is IN and the red POWER
LED is lit. The MIDI LEDs will flash whenever MIDI data is
received or transmitted and can be very helpful when trouble
shooting your MIDI system. If the INTERFACE/THRU switch
is In and MIDI data is sent out from the computer,…
Showing first 3,000 characters of 5,219 total. Open the full document →