Quick Start Guide

Image rescue Quick Start Guide Image Recovery - Recovers lost or deleted image files (JPEG, TIFF and RAW), from your memory card, even if you have erased them, reformatted the card, or your card has become corrupted*. <footnote> **Image Recovery is not 100% guaranteed. Card Test - Scans every sector on your memory card and reports any hardware errors found. Repairs any file system errors detected Format Card - Formats and deletes all files on your memory card. If your card is showing an error in your digital device this feature will make the card usable again. Secure Erase - Formats and permanently deletes all files on your memory card. Any file previously stored on your card will no longer be recoverable, not even by Image Rescue. Card Information - Displays the technical specifications of your Memory card. Card Update – Allows you to update the firmware on certain Lexar Media memory cards System Requirements Compatible Operating Systems: Windows2000/XP, Mac OS 10.2 or higher. One Mass Storage Class card reader and one available USB/USB2.0 or FireWire port on your computer to connect the reader, CD-ROM Drive (Retail version only) Available hard drive space equal to twice the capacity of your Memory card. Lexar JumpShot cables can also be used together Lexar USB enabled CompactFlash cards. Getting Started 1. Connect the JumpShot cable or mass storage class reader your computer 2. Insert the Memory card into the JumpShot cable or reader 3. Double-click on the Image Rescue icon to start the software Important Notes * Always insert the card into the reader before launching Image Rescue * Always quit Image Rescue before ejecting or removing your card * Access the Help File in Image Rescue for additional instructions Windows 2000 /XP * Before removing the Memory card from the JumpShot cable, go to the system tray (located on the bottom right corner next to the clock) and right click on the UNPLUG OR EJECT HARDWARE icon. Select the memory card and click STOP, select it again and click OK. It's now safe to remove your card. Macintosh * You must eject your Memory card in the Finder before removing it from the reader. * Do not access the card using the Finder or any program (such as iPhoto) if Image Rescue is running. Quit any program that may access the card. * If the card is not recognized by Mac OS X and the operating system asks to initialize the card, click continue and launch Image Rescue. Installation from a CD (Windows 2000/XP) 1. Close all programs you may have running before you begin the installation 2. Insert the Image Rescue CD into your CD-Rom drive 3. Double-click on the MY COMPUTER icon, CD-ROM drive icon, and then the setup.exe file 4. Follow the on-screen instructions 5. Plug the JumpShot cable into your computer after completing the installation process Installation from a Memory Card 1. Double click on the setup.exe file found on your Memory card to begin installation 2. Follow the on-scre…