Revolution 5.1 Quick Start Guide English

REVOLUTION 5.1 Quick Start Guide English Revolution 5.1 Tested to comply with FCC standards FOR HOME OR STUDIO USE WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. © 2006 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject to change without notice. Avid, M-Audio and Revolution 5.1 are either trademarks or registered trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners. Introduction This guide is intended to help get you started quickly. In order to achieve optimal usage of your new soundcard, we recommend that you carefully study the full manual on the enclosed CD-ROM, before or after completing the process described in this guide. E N Windows Installation G Note: You must have Direct X 9.0b installed in your system before installing the L Revolution 5.1 software. For your convenience, Direct X 9.0b is included on the I enclosed CD-ROM. S Running the Installer H Start your computer. Insert the M-AUDIO DRIVERS CD-ROM and wait a moment until it displays the InstallShield Wizard. Follow the instructions to install the driver properly. Installing the Card Shut your computer down, unplug it from its power source, and insert the Revolution 5.1 PCI card into an available PCI slot. For specific instructions on how to do this, please refer to the Revolution 5.1 Manual’s “Hardware Setup” section. Restart the computer. When the machine finishes rebooting, a “Found New Hardware Wizard” will appear with the recommended hardware driver settings already selected. Press “Next” and follow the onscreen prompts to complete the driver installation. Connecting the Speakers The Revolution 5.1 facilitates a variety of configurations ranging from two to six speakers. Connect the Left, Right, Center, Subwoofer, Left Surround, and Right Surround speakers to the jacks on the Revolution 5.1. Please refer to the manual for assistance with identifying the specific output jacks. Testing the Installation Play a DVD or other surround-enabled media to enjoy your new surround system. Open the Revolution 5.1 Control Panel to adjust the speaker settings. If your current DVD player cannot decode a Dolby Digital surround sound signal, install WinDVD 5 from the included CD-ROM. Mac OS 9.2.2 Installa…