Style Writer 1200

K Service Source StyleWriter 1200 K Service Source Basics StyleWriter 1200 Basics Introduction - 1 Introduction The StyleWriter 1200 is a high-resolution ink-jet printer. There are some differences between the StyleWriter 1200 and the StyleWriter II. Basics Introduction - 2 Hardware Differences •The two out-feed rollers at the front of the printer have only one rubber roller each, vs. two on StyleWriter II. •The sheet feeder has changed to be compatible with the new paper feeding scheme that the vendor has implemented across the product line. •The plastic cover of the controller and feed rollers has been changed to match the paper feeder. •The wheel on the carriage was removed. Basics Introduction - 3 Software Differences •Some simplifications have been made to the controller board, and the ROM has been upgraded to incorporate the additional print modes, auto-power on/off, and a new self- test page. • Two additional print modes have been added to the StyleWriter 1200: Fine and Smooth. Fine mode uses 360 dpi resolution and Smooth uses a 720 dpi horizontal by 360 dpi vertical resolution. • The printhead is automatically primed prior to the printing of the self-test page. • The Watermark feature allows the user to specify an image to appear in the background of each page being printed. Basics Introduction - 4 Paper Sizes The Executive size has been added to the StyleWriter 1200. The printer offers four paper sizes: • Letter (8.5" x 11") • Legal (8.5" x 14") • A4 (210 mm x 297 mm) • Executive (7.25 mm x 10.5 mm) Basics Introduction - 5 Envelope Sizes The number 6 envelope size has been added to the StyleWriter 1200. The printer offers two envelope sizes: • Number 6 (6.5" x 3.625") • Number 10 (9.5" x 4.125") Basics Test Page - 6 Test Page Online Key Turn on the printer and hold down the online key for at least 6 seconds or until the test page prints. Basics Test Page - 7 The test page shows the ROM revision and a test pattern. Use the test pattern to determine if the ink jets are functioning properly. If lines appear broken, proceed to the “Printing” topic in the Troubleshooting chapter. K Service Source …