VST Super Disk LSG3 MANUAL

VST SuperDisk™ Drive for the Macintosh PowerBook® What’s Inside The Box: VST SuperDisk Drive Installation CD-ROM SuperDisk diskette Also, in the box: • This User’s Guide • QuickStart Card • Product Registration Card CAUTION This equipment employs a visible Class 1 (7 milliwatts) laser beam. Laser radiation may be present when the drive operates without panels or covers installed. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in eye dam- age. Avoid looking directly in to the laser beam path or any reflection of it. Laser light of this intensity can cause serious eye damage. If your SuperDisk Drive does not work, never open the Drive. Drives will be opened by authorized service personnel only. © 1998 VST Technologies, Inc. SuperDisk is a trademark of Imation Corp. VST SuperDisk User’s Guide Contents Setting Up the VST SuperDisk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Installing the VST SuperDisk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Operating your VST SuperDisk Drive . . . . . . . . . . . . . . . . . . . . . . . . . .4 Diskette Insertion and Removal Emergency Disk Eject SuperDisk diskette Tips Electronic Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover 1 Setting Up the VST SuperDisk Software Before using your new VST SuperDisk for PowerBook, it is necessary to install driver software to allow the drive to interact properly with your PowerBook. The Tools software adds functionality to the drive while extending its features and making it easier to use. Follow the instructions below to ensure that the software installs properly. Note: You will need to restart your PowerBook during the installation process, so be sure to quit all open applications and save all files. 1. Insert the CD-ROM or DVD-ROM drive into the expansion bay of your PowerBook. 2. Insert the VST SuperDisk Drive Installation CD into the CD-ROM drive. 3. Double click on the SuperDisk Installer and follow the directions. 4. Restart your PowerBook. 5. For PowerBooks with only one available expansion bay, remove the CD from the CD-ROM drive and then remove the CD-ROM drive. 6. Insert the VST SuperDisk Drive into the expansion bay. 7. Insert a SuperDisk or floppy diskette into the drive. The diskette icon should appear on your Desktop within a few seconds. 2 Installing the VST SuperDisk Drive for PowerBook G3 Series Before using your new VST SuperDisk Drive for the PowerBook, it is neces- sary to install driver software to all…