Zorkanthology Refcard

THE ZORK ANTHOLOGY DOS CD-ROM INSTALLATION Refer to Page 14 for Macintosh Installation Minimum System Requirements • IBM PC or 100% compatible • CD-ROM drive (150K bps) • 512K RAM • MS-DOS (5.0 to 6.2 supported) • CGA/EGAJMCGAJVGA/SVGA •Hard disk drive with 2 MB available graphics card The Zork Anthology Installation 1. Insert The Zork Anthology CD into your CD-ROM drive (the following instructions will assume your CD-ROM drive is drive D:). Note: If you are in the WINDOWS environment, you must first exit WINDOWS by typing simultaneously: <ALT> <f4>. Repeat this step until you have exited all WINDOWS applications. To exit WINDOWS, answer "OK" by pressing <ENTER> when prompted. When you have arrived at a DOS prompt, follow the DOS installation instructions listed below. To install from DOS, at the DOS prompt, type D: and press <ENTER>. You should now be at the CD-ROM DOS prompt, which should look something like "D:\>." Type INSTALL and press <ENTER>. This should bring up the introduction to the installer program. The installer will ask you to determine a few installation preferences for your computer system. Follow the on- screen instructions carefully. 2. The installer will first ask you if you want the ability to launch all The Zork Anthology games from WINDOWS. Press <SPACE> to alternate between YES and NO, then press <ENTER> to make your selection. 3. If you answered "Yes" to setup to launch from WINDOWS, the installer will ask you to select the hard drive in which WINDOWS is installed or will be installed in your system. Use the arrow keys to select the hard drive you want, then press <ENTER> to select the hard drive currently flashing on your screen. 4. If you answered "Yes" to setup to launch from WINDOWS, you will then be asked to enter a directory name in which WINDOWS is installed or will be installed in . The default directory "\WINDOWS" will appear on screen. To use the default name, press <ENTER>; otherwise, backspace to delete that name and type in the correct name. 5. It is necessary for The Zork Anthology to be copied onto your hard drive (you cannot play the games off of the CD-ROM). The installer will ask you to select the hard drive to which you wish to install. Use the arrow keys to select the hard drive you want, then press <ENTER> to select the hard drive currently flashing on your screen. 6. You will then be asked to enter a directory name for The Zork Anthology. The default directory "\ZORK" will appear on the screen. To use the default name, press <ENTER>; otherwise, backspace to delete that name and type a new name of a maximum of eight characters. Note: This step will be skipped if you answered "YES" to setup to launch from WINDOWS. The default directory "\ZORK" will be used. 7. If the directory you chose already exists on your hard dr…