Thread
powerbook g4
Hi,
I'm looking for schematic diagram to my TDK 699-0153 power supply for Mac LC II. Do you know where can I get it. I want to repair my Mac
Greetings
Kamil
I'm looking for schematic diagram to my TDK 699-0153 power supply for Mac LC II. Do you know where can I get it. I want to repair my Mac
Greetings
Kamil
hi all,
you might have seen my earlier post at 68kmla about g5's, g4's and my (ex-)macbook. i got a powerbook 15" 1.5 ghz and i think i can settle with it for a while. the strange thing is that although it runs tiger quite well, it hates leopard. i cannot figure out why. it has 1.5 gigs of ram, a decent cpu etc.
but the most weird thing is that on my 867 mhz quicksilver g4 (1.5 g ram) lepard runs wonderfully. much better than tiger. what can possibly the problem? i thought it might be that the quicksilver has l3 cache, but i am not sure.
i do need leopard, and not for the eyecandy, but for its better airport drivers (wifi under 10.4.11 has worse ranges than bluetooth) and overall better networking (in tiger i have to log out and in to see a new client on the local network and if i change from airport to lan it just refuses to open the network 'folder' until restart.
anyone has any ideas?
thanks
_________________
let there be more light
you might have seen my earlier post at 68kmla about g5's, g4's and my (ex-)macbook. i got a powerbook 15" 1.5 ghz and i think i can settle with it for a while. the strange thing is that although it runs tiger quite well, it hates leopard. i cannot figure out why. it has 1.5 gigs of ram, a decent cpu etc.
but the most weird thing is that on my 867 mhz quicksilver g4 (1.5 g ram) lepard runs wonderfully. much better than tiger. what can possibly the problem? i thought it might be that the quicksilver has l3 cache, but i am not sure.
i do need leopard, and not for the eyecandy, but for its better airport drivers (wifi under 10.4.11 has worse ranges than bluetooth) and overall better networking (in tiger i have to log out and in to see a new client on the local network and if i change from airport to lan it just refuses to open the network 'folder' until restart.
anyone has any ideas?
thanks
_________________
let there be more light
Uniserver is the man to see. You can PM him on this forum or email him from his website - Mac Caps.
Here's a reference page on what you may need from his site:
http://maccaps.com/MacCaps/Capacitor_Reference/Capacitor_Reference.html
and http://maccaps.com/MacCaps/Capacitor_Reference/Entries/1990/10/15_LC_I%2C_II%2C_III_Power_Supplies.html
Here's a reference page on what you may need from his site:
http://maccaps.com/MacCaps/Capacitor_Reference/Capacitor_Reference.html
and http://maccaps.com/MacCaps/Capacitor_Reference/Entries/1990/10/15_LC_I%2C_II%2C_III_Power_Supplies.html
I have 10.5.8 installed on two 1.67ghz machines and they run with no problems. They came pre-loaded with Leopard, though, so I don't know what installing is like. One originally came with 10.5 and the other with 10.5.6 and I did have a few problems with automatic update where I had to download the standalone updaters to get them up to 10.5.8.
Thank you for answer. I will contact with Uniserver.
PS. You have got beautiful collection of Mac's
Greetings
Kamil
PS. You have got beautiful collection of Mac's
Greetings
Kamil
Thanks. I hope to get the dead ones working soon enough. And I hope your collection grows as mine did.