Home▸ Forums▸ PPCMLA▸ performa 6200 — #3
Post #3 by QuadSix50
Source ForumPPCMLA
CategoryHardware
Post DateSun, 13 May 2007 - 04:52
Original URLhttp://www.ppcmla.com/forums/viewtopic.php?t=144
Post
As I mentioned on 68KMLA, 9.1 is too much for an old Mac like the 6200. I would recommend 7.6.1 since it's pretty lean compared to 9.1 (not as much memory requirements). If you need the contextual menu and some other features not found in 7.6.1 (like HFS+ support), then go Mac OS 8.1. Contrary to Windows, you don't always need to run the latest OS version on the Mac platform. Just the one that works the fastest. Wink

Also, if you can make sure that you upgrade the RAM to its maximum (64 MB).

All of this is covered on the thread that you created over at 68KMLA. Wink

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.