JW is trag, contributor to this forum, 'Fritter and 68KMLA. He is also the maker and seller of the 64-pin 16MB SIMMs for IIfx and other bits, in recent times.
All of what you wrote about the two buses, with the exception of avoiding Bandit 1 for performance gain, was more-or-less familiar from past reading. That link was useful, and I thank you. I may have read it at the time, and recently been looking in the wrong place for the info. in it. I shall certainly chase up the Developer article.
I happily put G4 CPUs into Beige G3s, but never more than G3s into the 60x Macs. Mostly it works, but the present 9650 (G3/500) is being a bit of a beastard in several ways. I shall look again, hard, at my slot hierarchy, despite that I had thought that that was settled.
de
_________________
(60x) 13DT + 3PB + PTPro; (G3) 7DT/MT; (G4) 3T + PB. System 8.1 to OS 10.5.8
All of what you wrote about the two buses, with the exception of avoiding Bandit 1 for performance gain, was more-or-less familiar from past reading. That link was useful, and I thank you. I may have read it at the time, and recently been looking in the wrong place for the info. in it. I shall certainly chase up the Developer article.
I happily put G4 CPUs into Beige G3s, but never more than G3s into the 60x Macs. Mostly it works, but the present 9650 (G3/500) is being a bit of a beastard in several ways. I shall look again, hard, at my slot hierarchy, despite that I had thought that that was settled.
de
_________________
(60x) 13DT + 3PB + PTPro; (G3) 7DT/MT; (G4) 3T + PB. System 8.1 to OS 10.5.8