Fwb Hdt 16 Relnotes

Hard Disk ToolKit™ Personal Edition v1.6 Release Notes ©1994 FWB Software, Inc. 6/29/94 NOTICE The Hard Disk ToolKit™ PE floppy included with this package is not bootable; you cannot use the floppy as a Startup disk. Please follow the instructions below if you need to build a System 6 or a System 7 Startup disk. The increased number of devices supported and additional features have prevented us from creating a Startup disk with this version. We apologize for the inconvenience. Additional features/notes of HDT not mentioned in the manual: HDT Installer • BEFORE proceeding with the installation, disable any virus protection software. • Discard older HDT modules with version numbers in their names ie. HDT Primer™ 1.2, HDT Prober™ 1.3, HDT Extension™ I.5.1, etc. especially those stored in the Control Panel and Extension folders, the installer will not replace these versions. • The installer will install HDT Prober™ and HDT Extension™ directly into the Control Panel and Extension folders of your System Folder. • You must restart the system after installing the CDEVs and the system extension in order for the installation to take effect. General • In this release note, HDT and HDT PE are used interchangeably. For example, HDT Primer PE and HDT Primer are one and the same application. • Serial numbers are of the format ZZXXXXXXZXZ, where X are numbers and Z are letters. If you are upgrading from an older version of HDT, please use your old serial number. Older JackHammer serial numbers are of the format JXXXXXZXZ, where J is the letter 'J', X are numbers and Z are letters. Do not enter any spaces or confuse zeros with the letter O. • The disk from which you run the program must also be write-enabled before personalization can occur. You can run the program off a write-protected disk without saving the personalization information. Do not use the original master disks to personalize the program, make a working backup copy. • We recommend a minimum of 2MB of system memory for Hard Disk ToolKit™ PE. SCSI Manager 4.3 Hard Disk Tool Kit is fully compatible with Apple's SCSI Manager 4.3. Updating or installing the latest FWB drivers will allow you to exploit the capabilities of Apple's SCSI Manager on Apple's AV, PowerMacintosh, and PowerPC Upgraded Macintosh computers. The benefits of FWB's latest driver coupled with Apple's SCSI Manager 4.3 are: reduced SCSI 1/0 processing overhead, asynchronous SCSI I/O, and maximized SCSI bus utilization which translates to higher overall data throughput. PowerPC Native Applications HDT Primer™ PE is a "fat" application. This means that this application contains both 68K and PowerPC code to allow it to run native in either 68K-based and PowerPC-based machines without user intervention. As the term implies, this application consumes more disk space and mem…