I Trip Manual

MANUAL Thank you for purchasing the iTrip, the only wireless FM transmitter made specifically for the iPod. Now you can play your music in your car or anywhere there's an FM radio. We'll have you up and running in three easy steps. iTRIP QUICK START (Mac) 1 Insert the included iTrip CD-Rom into your Mac. Launch and run the iTrip Installer. All necessary files are now installed into iTunes. 2 Connect and sync your iPod with iTunes. This will transfer the newly created iTrip Stations playlist and files into your iPod. 3 Properly disconnect the FireWire cable and firmly attach the iTrip into the headphone jack of the iPod. Playing music through the iTrip automatically turns the iTrip on. The LED will blink as it's powering up. The iTrip is preset to 87.9 on your FM radio. To select your own station, follow the instructions that continue inside this booklet. iTRIP QUICK START (PC) 1 Insert the included iTrip CD-Rom into your PC. The iTrip Installer should begin automatically. If this does not happen, simply run the Setup.EXE file located on the iTrip CD-Rom. This will install all necessary files into MusicMatch or iTunes. 2 Connect and sync your iPod with MusicMatch or iTunes. This will transfer the newly created iTrip Stations playlist and files into your iPod. 3 Properly disconnect the FireWire cable and firmly attach the iTrip into the headphone jack of the iPod. Playing music through the iTrip automatically turns the iTrip on. The LED will blink as it's powering up. The iTrip is preset to 87.9 on your FM radio. To select your own station, follow the instructions that continue inside this booklet. The iTrip can broadcast to any spot on your PLAY/PAUSE ( ) button FM radio. Scan the FM stations to find an empty frequency. Then follow these simple steps to set your iTrip to broadcast to that selected frequency. CHOOSING A NEW BROADCAST FREQUENCY 1 Navigate to the iTrip Stations playlist installed on your iPod. 2 Highlight the chosen frequency and click the PLAY/PAUSE ( ) button. 3 When the LED begins to rapidly blink, click the PLAY/PAUSE ( ) button once again. The LED light will pulse three times slowly to confirm the iTrip has changed its frequency successfully. NOTES & TIPS: The volume of your iPod needs to be between 40% - 80% for the iTrip frequency change to work correctly. Check and adjust this first before attempting a change. You can change frequencies as many times as you want. You may also discard any iTrip stations you currently don't need. The whole collection will always be available on the iTrip CD-Rom and online. TURNING THE LED ‘OFF’ OR ‘ON’ To turn the status LED on the front of the iTrip OFF, navigate to the bottom of the iTrip Stations playlist and select “LED off”. Then follow these two simple steps. 1 Click the PLAY/PAUSE ( ) button on your iPod. 2 When the LED begins to rapidly blink, click the PLAY/PAUSE ( ) button again. The LED will pul…