Some time ago I got a Radius Pivot Color NuBus card in the hopes of getting something working with the Pivot monitor I have. The card has the part number 632-00…
Advanced filters
Source
So anyway, I have three old-skool Sony/Apple floppy drives, two 800k and one SuperDrive (and no, it doesn't burn DVDs), each with their own problem: MFD-51W-10 …
One of our 68kMLA members here recently PM'd me about a problem he's been having trying to format 400k floppies for booting on his 128k Mac. He told me the foll…
Besides the benefit of having a 32-bit clean ROM, an SE/30 can boot off of a CD-ROM drive by holding Command+C at start-up. I tried it with an Apple Legacy CD a…
:beige: To all the devoted and helpful users, hello. As my first post on this forum, I can only hope from now on to have the same level of excitement as some pe…
I have a Mac SE FDHD that has the screen a bit too wide. I opened it to adjust things and see the variable inductor (L2) is a bit messed up. The hollow core (th…
Hey, I recently acquired a brand-new Sonnet Tempo SATA card, and am trying to get it to run under Tiger on my 9600/Sonnet Crescendo G4. The problem is that whil…
Well, I may be backed into a tight corner. Just wondering if there is any way I can take the ingredients I have and make fire. I have a Lombard drive that is no…
As I've mentioned in the Conquests thread, I just recently obtained a 500MHz iBook G3 off ebay. (64 MB RAM, CD-ROM, 10 GB HDD, OS 9.2.2). Right now, going into …
I picked up another 128k Mac, this one from the 29th week of 1984. It was in good cosmetic shape but wouldn't boot and gave an odd error code. I guessed that it…
So I came back to the Floodgap Orbiting HQ after visiting the folks, took out my TiBook/867 and promptly dropped it on the floor, right hinge down. I picked it …
So I picked up this Wallstreet parts bucket for a couple of dollars. It's obviously been dropped at one point while closed and hit on the corner of the display …
Hello All, I had a rather quick question which will hopefully be simple to answer. I recently purchased some RAM for my PowerMac 8100/80 (6 32MB SIMMS to be pre…
Hello, I have two SE/30 logic boards, which I tried to "re-cap", and unfortunately some pads lifted and broke away, probably due to some corrosion from the old …
Ok, on my new powerbook, The I/O Port Cover will not close completely. Is this something that I can fix without having to take the computer apart, or does it ha…
As posted to macos9: Classilla 9.3.0 is released after a long gestation and period of refocusing. As is widely known and reported, 9.3.0 alters the user agent t…
After having removed the screws on the back, I am unable to open my Apple IIc. In particular there is something that locks case in the border near the center of…
I just picked up an FDHD external floppy disk manual. The part number is 030-1507-A and copyright 1989. Typically by this time, most first edition Apple manuals…
In the next post, I'll post photos of my progress with the recapping itself, since I'd like to know what the experts think I could improve upon in terms of my s…
I've got a pair of dead StyleWriters on my hands. Both turned on the last time I powered them up (2008) but now appear to be completely dead. StyleWriter #1 is …
I want to thank everyone on this board for their posts - I lucked into a free SE/30 and a Quadra 900 (one of my co-workers was moving and either gave away or so…
Hi, I just today received a Radius Thunder IV GX 1360 card. I have installed the card and am seeing strange behavior. As I have never used one of these cards be…
So my Quadra 950 seems to have issues booting, especially when its cold in the room (I'm talking real cold like in the 50s). I can leave it running but after a …
Recent conquests. Too lazy to include pictures right now, maybe later on. Hardware: - Apple //c ("for parts" - see "Apple I, ][, /// & Lisa"-thread) - n…
G'day y'all, This PowerBook Duo 2300cTB has a memory issue (and a dead PRAM battery) leading to the following: { "lightbox_close": "Close", "lightbox_next": "Ne…