Thread
Home Networking .. Router and Airport?
Ok,
I have a cable modem coming in. Currently I plug it's Ethernet into my Airport Base station (graphite) and everything works great .. Now a windows machine enters ... (isn't this always where the trouble starts ...)
Anyways I originally tried to install an 802.11 card on the windows box to get it on the net but it never worked (my thinking is it's bad hardware cause it didn't work on three separate boxes) so now I'm thinking of hooking it up to Ethernet which it does have.
Can I buy a router and hook it up to the cable modem to split the connection with the PC and the base station.
Cable Modem
--> Router
----> PC via Ethernet
----> Airport Base Station -> Powerbook
Will this work? Suggestions? Costs?
I have a cable modem coming in. Currently I plug it's Ethernet into my Airport Base station (graphite) and everything works great .. Now a windows machine enters ... (isn't this always where the trouble starts ...)
Anyways I originally tried to install an 802.11 card on the windows box to get it on the net but it never worked (my thinking is it's bad hardware cause it didn't work on three separate boxes) so now I'm thinking of hooking it up to Ethernet which it does have.
Can I buy a router and hook it up to the cable modem to split the connection with the PC and the base station.
Cable Modem
--> Router
----> PC via Ethernet
----> Airport Base Station -> Powerbook
Will this work? Suggestions? Costs?
Can't you just connect the PC via ethernet to the base station? I don't think you need an additional router--the base station essentially is one.
ABS Graphite only has an incoming Ethernet connection 
You're thinking of the newer ones.
You're thinking of the newer ones.
Quote:
|
Originally posted by zorn: ABS Graphite only has an incoming Ethernet connection You're thinking of the newer ones.
|
Oops. My bad. I thought the one ethernet port meant one LAN in addition to a WAN. Well, well.
Quote:
|
Originally posted by derien: Oops. My bad. I thought the one ethernet port meant one LAN in addition to a WAN. Well, well. |
You need an ethernet hub, or switch, and you plug the cable modem into that, and the airport into that, and the other machines into that. LO, you set up airport to ethernet bridging (enable) you use the ABS to do DHCP and NAT. The public IP from the cable modem is given to the ABS, which runs NAT, and redistributes private 10. IP addresses over the same hub/switch. No router required. Some comments.... 1) make sure that if you use DHCP to give the IP addy to the ABS from the cable modem, that it is the ONLY ethernet mac address that the cable modem sees as it powers up. potentially use static addys on the 10. network.
Bleh. It works, but its messy. You save $150 on a router. YMMV.
(it slows the ABS file transfer from machine to machine to a crawl too)
Ben.
Maybe in Canada routers are $150+ plus
but here in the technologically superior
USA, they are about $35-50 and it would
make what the gentleman is trying to do
soooo much easier.
but here in the technologically superior
USA, they are about $35-50 and it would
make what the gentleman is trying to do
soooo much easier.
I use a linksys 4 port router/switch combo to do exactly what you are describing.
Modem ---> Router
Router --> PC Ethernet Card
AND Router --> Airport Base Station
Works fine...cost is about $50.00 at pricewatch.
Modem ---> Router
Router --> PC Ethernet Card
AND Router --> Airport Base Station
Works fine...cost is about $50.00 at pricewatch.
Quote:
|
Originally posted by ringo: I use a linksys 4 port router/switch combo to do exactly what you are describing. |
Quote:
| Windows will notify you that the driver has not passed Windows logo testing. Since this product has been tested to work with Windows XP, click the Continue Anyway button. |
I asked my friend (a PC hardware guru) about it and he comments on related flakiness of his own linksys 802.11 stuff.
And finally, why does linysys make you use a proprietary config tool when XP has 802.11 built in?!?!
Saficly(sp?) to say, I will not be purchasing nor recommending any Linksys products anymore ...
</rant>
Quote:
|
Originally posted by zorn: The orig 802.11 card I was trying to get to work was a linksys product. It took them months to come out with XP drivers, then when they did it came with instructions like:Not surprisingly it never worked, and since it so long to try the store didn't take back the equipment (card and PCI adaptor) .. $200 down the drain I asked my friend (a PC hardware guru) about it and he comments on related flakiness of his own linksys 802.11 stuff. And finally, why does linysys make you use a proprietary config tool when XP has 802.11 built in?!?! Saficly(sp?) to say, I will not be purchasing nor recommending any Linksys products anymore ... </rant> |
I can't comment on Linksys 812.11 products, my router isn't a wireless base station...just a router/switch...I'm using ethernet cables to connect the PC and base station to the router.
It acts as a DHCP sever, so the only configuration I remember doing to the PC was telling the ethernet card to ask for an IP address instead of manually assigning one.
I had a linksys WAP11 and it sucked.
My current setup is a Linksys BEFCMU10 (great cable modem) to a Linksys BEFSR41 (great router) to an Orinoco (Lucent/Agere) RG-1100 Wireless Access Point (great WAP).
I like Linksys--as you can see--and I want to go all Linksys, but their wireless products suck.
The RG-1100 is the same as the Graphite ABS, but it also supports 128-bit WEP, and you can configure it via the Apple Airport Admin Utility. I highly recommend it.
My current setup is a Linksys BEFCMU10 (great cable modem) to a Linksys BEFSR41 (great router) to an Orinoco (Lucent/Agere) RG-1100 Wireless Access Point (great WAP).
I like Linksys--as you can see--and I want to go all Linksys, but their wireless products suck.
The RG-1100 is the same as the Graphite ABS, but it also supports 128-bit WEP, and you can configure it via the Apple Airport Admin Utility. I highly recommend it.