multi touch is cool, and it will be the future of handheld lite systems (ie ipod) but for current normal day to day computer use it is more gimicky then useful
and yea, I would ra…
You can get a 4 gig CF card for less than $15, or less than $20 for a fast one or a good brand. On the other hand, $27 is pretty good, especially considering the fact that you don'…
Thanks, I did a lot of looking, but I couldn't find anything that told what the standard was for IDE on the G3. I personally think the key pin is redundant as there is a key molded…
68kMLAHardwareby Green78IISun, 10 Jan 2010 - 16:33
no Mars, sadly they do not. this one is missing a large metal plate/stand that would be bolted to the back, but i have that from my other gemini, it keeps the closed/prevents peopl…
Do you think that this will work?
Click to expand...
Should do, yes.
this:http://cgi.ebay.com/4GB-Disk-On-Module-40Pins-Industrial-MLC-IDE-Flash_W0QQitemZ220395738789QQc…
Word of advice, apple techs are not allowed to share what they do on the interwebs. If apple finds out, instant fire from job I hear.
Extremely strict on guidelines.
Click to ex…
I pulled out my power supply to clean it up a bit underneath, and I decided I would try to add an 80 conductor cable to my G3. However, I found that the connector is slightly diffe…
68kMLAHardwareby Anonymous FreakSun, 10 Jan 2010 - 07:56
Word of advice, apple techs are not allowed to share what they do on the interwebs. If apple finds out, instant fire from job I hear.
Extremely strict on guidelines.
68kMLAHardwareby ChristopherSun, 10 Jan 2010 - 06:44
mix some thermal paste with gel super glue
Click to expand...
[...]but the tube of adhesive to attach it to the new logic board is basically more expensive than to just …
68kMLAHardwareby Dennis NedrySun, 10 Jan 2010 - 06:10
yes it most likely came as a service pack
Click to expand...
I agree; that really is the only way that makes sense.
That's strange too though because there are no instructions…
68kMLAHardwareby Dennis NedrySun, 10 Jan 2010 - 06:02
I pulled out my power supply to clean it up a bit underneath, and I decided I would try to add an 80 conductor cable to my G3. However, I found that the connector is slightly diffe…
68kMLAHardwareby Green78IISun, 10 Jan 2010 - 04:14
I don't know anything about the pismo, but apple is strange like that.Have you tried removing the heatsink with a heat gun?
Click to expand...
I thought about using a heat gun,…
68kMLAHardwareby Dennis NedrySun, 10 Jan 2010 - 03:18
Here is a picture of it as seen in the Apple Service Manual:
This is from page 91: Take Apart/Procedures/I/O Logic Board/PCMCIA Card Cage.
You can see the shiny adhesive pad…
68kMLAHardwareby Dennis NedrySun, 10 Jan 2010 - 00:19
Panther and Tiger install CDs. They'll load on my iMac but not on the G3. I have an external DVD writer hooked up to the G3 it will list it in System Profiler but I can't access an…