It arrived, but has a hinge problem: the two halves of the left hinge do not meet, and the left display cable has worked up into the bezel, and is pushing the bezel away from the s…

It is, most devices these days are RISC. They're just not POWER.

techknight said: look at those million psychedelic colors. lol. And the new P6 chip.  Click to expand... Yeah, I hear RISC technology is the wave of the future...

There is no ROM SIMM for the TAM, never was unless proto. Good theory on the ROM with startup chime. I can not say, but falen5 I think has the skills to swap ROM chips if needed.

I was having the same problem as you... see my thread below.  I had to wash the board 5 different times to get it to work.  I also discovered pin 50 bent, touching pin 49 on the c…

look at those million psychedelic colors. lol. And the new P6 chip. 

haplain said: It WILL work without that ROM SIMM for sure. Click to expand... I wonder if it will have a different gestalt without that rom sim though, maybe it will iden…

It WILL work without that ROM SIMM for sure.

falen5 said: Don't understand why it would work without the rom!!! Does it have another onboard? - off to bed for me - sure I had to film the teardown - good luck peop…

Also, just as a minor point on the chemistry, if vinegar neutralizes it, then its an alkaline substances eating the board, not an acid, you can't neutralize an acid with an acid (a…

haplain said: I know where you can get TAM boards. They aren't cheap but they are available.  Click to expand... Hey hap, is that from that place in the Netherlands?  I'…

Don't understand why it would work without the rom!!! Does it have another onboard? - off to bed for me - sure I had to film the teardown - good luck people -

Focus on that rom slot and it might work, you might not even need that rom since the 6500 doesn't but I'm not sure...

gave it a good wash - vinegar/water 50/50, then the usual water and washing up liquid it looks allot better - there is still some green , but allot of the via's that were all gr…

I looked and from what I can see the 6500 board would only need slight modifications, The scsi port is removed and the audio ports are removed and replaced with the small board on …

Now that I got my SE\30, Classic II and Mac Plus working, it is time for some preventative measures. Where can one get analog parts for the usual suspects? I'm down to my least bit…

It is but it has some special pieces for the sound connectors that the 5400/6400 board(s) don't have. 

Yeah; anything from the G3 Snow and Dual USB have the smaller PowerBook PSU Connector. Lets hope for the best here.

techknight said: It is not advisable to use ceramic capacitors in DC-DC switching circuits to replace electrolytics. Tantalum is ok.  - - - - - - - - - - Also, you dont han…

I'm pretty sure that it's a 5500/6500 Logic board

Tonight's project was to get the CC playing nice over Ethernet, which then turned into installing  and setting up MacTCP and finally after some degree of fiddling and tweaking sett…

thanks haplain - will do the vinegar.........jasus im gonna stink!!

Hello, I'm not sure able acetone. I do know that vinegar will neutralize the acid but not entirely sure about acetone. I would do vinegar and water mixture (50/50) then rinse with…

thanks for the reply haplain. - im going to clean the whole board then recap it. - I read somewhere that when you wash  the board in acetone in stops any futher decay from the …

The card with the heat sink is a Sonnet 400Mhz accelerator. They are quite rare. They came in 300/400/500Mhz. The 500's are really tough to find.  I would clean that ROM slot but …