Double check your work (make sure the + and - of the capacitors is in the correct spot). The video needs the 1uf 50V capacitors to work. No bong means either the capacitor on the …

Double check your work (make sure the + and - of the capacitors is in the correct spot). The video needs the 1uf 50V capacitors to work. No bong means either the capacitor on the …

The difference, if measurable, between CF and SATA on a polled I/O SCSI bus on a 16 MHz m68030 is going to be so insignificant as to be noise. Click to expand... Pure speculati…

Hi there. Meet my Macintosh Classic II. { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requeste…

Update, my USB flash drives don't work in 8.6 and I get an error type 1010 trying to installing 9.2. But as of now I have 10.0 running and with 8.6 on a different partition. After …

The difference, if measurable, between CF and SATA on a polled I/O SCSI bus on a 16 MHz m68030 is going to be so insignificant as to be noise. Any CF (except perhaps the slowest, o…

...unless you are using a decent PowerMac, a CF card will not hamper you much. Click to expand... I don't want to be hampered at all. Indeed, I want a speed boost for reads an…

I suppose the SCSI bus is hindered by age, and by a dog-slow system bus. Click to expand... Very much so. These are not SE/30s and not SCSI but you get the idea. http://poopr.…

G-AH! I just realized that this post has gotten moved to the wrong forum! This is NOT a list of "for-sale" items. This was just a list of items, a few of which happen to be for …

games system wise - what would people be doing with them? Click to expand... Well, one of my ideas, for example: Using a Gameboy to emulate a serial LCD (HD44780 or a graphic …

In the earliest days of the retrochallenge it was a straight date cutoff, of ten years I believe, however this was changed a few years ago because 1994 seemed retro then, but 1999/…

Oops I read incorrectly.

In the earliest days of the retrochallenge it was a straight date cutoff, of ten years I believe, however this was changed a few years ago because 1994 seemed retro then, but 1999/…

Any chance of selling the TiBook cheap? I have been wanting a TiBook for a while... Click to expand... Uh... There's no TiBook. There are a couple G3s, and an Aluminum G4. A…

Yeah, I tend to agree. Re prices: It's been a while since I checked, and I forget how quickly computer related stuff gets cheaper.

You can get a 4 gig CF card for less than $15, or less than $20 for a fast one or a good brand. On the other hand, $27 is pretty good, especially considering the fact that you don'…

Thanks, I did a lot of looking, but I couldn't find anything that told what the standard was for IDE on the G3. I personally think the key pin is redundant as there is a key molded…

Any chance of selling the TiBook cheap? I have been wanting a TiBook for a while...

Well, that was a productive bit of archaeology!

Do you think that this will work? Click to expand... Should do, yes. this:http://cgi.ebay.com/4GB-Disk-On-Module-40Pins-Industrial-MLC-IDE-Flash_W0QQitemZ220395738789QQc…

Word of advice, apple techs are not allowed to share what they do on the interwebs. If apple finds out, instant fire from job I hear. Extremely strict on guidelines. Click to ex…

I pulled out my power supply to clean it up a bit underneath, and I decided I would try to add an 80 conductor cable to my G3. However, I found that the connector is slightly diffe…

I'm ruling out the ata bus's died.

Word of advice, apple techs are not allowed to share what they do on the interwebs. If apple finds out, instant fire from job I hear. Extremely strict on guidelines.

mix some thermal paste with gel super glue Click to expand... [...]but the tube of adhesive to attach it to the new logic board is basically more expensive than to just …