So as you probably know I intended to delve into the cave and retreive some more treasures, bats and spiders some time back but didnt know where to start... well I found the motiva…

I've neglected this thread for a bit, however that isnt to say things havent been happening. :  For one, I recently added a Sawtooth G4 to the tower of power collection... It's ve…

Hmmmm interesting.  I'm using a Crescendo 400/1M G3 CPU to preserve the stock card (and have more speed), and I actually noticed I have the Powerlogix control panel app and extensi…

I have the same issue using a 200MP dual 604 board on my 9600 get chime sound but dont get video, same problem on a 8600. The trouble seem to be the L2 cache on the 8600 removing …

CompuNurd said: I'll do that a bit later. It's put away right now. Does the Q950 have on board graphics, or could it have been part of the card I just blew? Click to expan…

Here's an update: I've actually found the culprit! (I think) There was a chip in the battery area named T548 whose function I don't know. This chip had developed a short, probably…

Thank you

There are 3 install discs that were issued by apple to DTK owners: Mac OS X 10.4.1 8B1025 Mac OS X 10.4.1 8B1099 Mac OS X 10.4.3 8F1111 All of these have been patched in variou…

The BIOS is a custom one based on the intel reference bios for this board series. It pre-dates the "retail" board used in the D915GXX series by a little bit (no surprise there as t…

I decided to take a few resistance measures between the pads of the capacitors in the battery area of the logic board.  Among the top 6 capacitors, the two on the left and the two …

Cool!

No but the battery area looked like yours so just to be safe it was worth it while apart to do it.

Macdrone, what was wrong with your board? Was it exhibiting similar problems?

When I did mine taking them all off and putting in 1 by 1 worked well for me. And I did that with a radio shack special 3 years ago , I'm pretty sure that makes me crazy also lol.

Had time to look at this boy more closely today. I've washed the board completely over again, and now it's really shiny clean - unfortunately no luck with the problem. So I've de…

I try this this week Today, i have connected a VGA header (with haplain help) and it works : i have connected two display 

raoulduke.... What I love about building your own battery replacements is that the older the device, the higher mAh your new one will be. I just found a PRAM replacement battery …

Pull out the PSU and inspect the Q950 board. Make sure there are no burnt traces on the board. It has onboard Video to connect to a monitor. The Nuvista card was for video process…

All three PowerBooks (PB 3400c + PB G3 "Kanga" + PB 3400c) are booting to desktop, the left one still with faulty keyboard connectors.

Here some more pictures which I shot, when the PB 3400c battery fell down. - Yes the battery is still ok.  (dimensions in centimeters)

Thank you, that was very helpful.

These are the pinouts:

Good luck! I doubt to be successfull with mine, as the leaking PRAM battery was above the keyboard connectors and video part. The worst place ever!

Congrat ! Will try that Scratch Brush on one of my 3400/240 boards . Only tried with a tooth brush, and it couldn't reach every places.

MikeatOSX said: BTW: Here's a new version of the Kanga logic board pic with some labeling. http://www.mediafire.com/download/cb2726zofowbqkg/PowerBook_G3_Kanga_Logic_Board_H…