Skip to main content
Search titles, bodies, and author names
Found 13,093 posts across 1 forum.

New Logic Board, missing GPU heat sink — #5

Does anyone have any idea why these would have NO heatsink, though? They are brand new, and there is no residue of any heatsink ever having been installed. The seller on eBay say…
68kMLA Hardware by Dennis Nedry Sat, 9 Jan 2010 - 08:22

Solid State Drive (SSD) in SE/30 — #31

In my SE/30, I am currently using an R-IDSC-E SCSI to IDE converter purchased off ebay, which is still for sale for ~$35. http://cgi.ebay.com/IDE-40pin-to-SCSI-50pin-Bridge-Adapte…
68kMLA Hardware by bbraun Sat, 9 Jan 2010 - 08:05

Solid State Drive (SSD) in SE/30 — #30

Almost: http://www.newegg.com/Product/Product.aspx?Item=N82E16820183192 http://www.acard.com.tw/english/fb01-product.jsp?idno_no=249&prod_no=ARS-2000SUP&type1_tit…
68kMLA Hardware by johnklos Sat, 9 Jan 2010 - 07:37

Solid State Drive (SSD) in SE/30 — #29

If there was a simple, low-cost 50-pin SCSI SSD or CF card solution out there, no doubt we'd all being linking to the product here on 68kMLA. For who among us doesn't want such a …
68kMLA Hardware by JDW Sat, 9 Jan 2010 - 07:15

Solid State Drive (SSD) in SE/30 — #28

Even so, this solution is not as idea as a dedicated SSD due to the limited number of writes on Flash memories. Click to expand... Typical SSDs are rated to 1million write cycl…
68kMLA Hardware by bbraun Sat, 9 Jan 2010 - 06:12

New Logic Board, missing GPU heat sink — #4

well since were showing pictures, here's the heatsink I last did the super glue trick on, It ran on a hot-rodded geforce 2 GTS from 2004 to 2009, I was moving, tried the card, it w…
68kMLA Hardware by Osgeld Sat, 9 Jan 2010 - 05:34

Solid State Drive (SSD) in SE/30 — #27

2.5" SATA SSD drives which would constitute "dedicated SSD" can be used with the rather expensive Acard SATA to 50 pin SCSI giving you a very nice 3.5" 50 pin SCSI form factor with…
68kMLA Hardware by johnklos Sat, 9 Jan 2010 - 04:13

New Logic Board, missing GPU heat sink — #3

I know you're anxious, but if you can wait, you can buy some epoxy-type heat sink compound and put the heat sink on permanently. I use it for putting heat sinks on my m68040s on my…
68kMLA Hardware by johnklos Sat, 9 Jan 2010 - 04:06

Solid State Drive (SSD) in SE/30 — #26

Why buy that when you can buy this?! Click to expand... If they only had one of those in 50-pin SCSI form we'd be set! (Yes, I'm fully aware of IDE-SCSI adapters. I am talkin…
68kMLA Hardware by JDW Sat, 9 Jan 2010 - 03:43

Solid State Drive (SSD) in SE/30 — #25

Why buy that when you can buy this?! http://cgi.ebay.com/Lot-of-10-x-CF-TO-IDE-CF-II-Adapter-Converter-Female_W0QQitemZ230337129230QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3…
68kMLA Hardware by Mars478 Sat, 9 Jan 2010 - 02:49

Solid State Drive (SSD) in SE/30 — #24

Hi Do you think that this will work? http://cgi.ebay.com/IDE-to-SCSI-Converter-Board-for-CD-DVD-Drives-R-IDSC_W0QQitemZ330387956791QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item…
68kMLA Hardware by neko77 Sat, 9 Jan 2010 - 02:35

Conquest: Blue G3 — #2

Rev 1's have glitches with the ATA controller (Can be overcome with a PCI ATA/SATA/SCSI Card), otherwise nothing that different. I think the B&W G3 is a great Mac Tower, es…
68kMLA Hardware by Mars478 Sat, 9 Jan 2010 - 01:26

Conquest: Blue G3 — #1

My friend just gave me a G3 they had at his printing company that was going to be thrown out. It's not too dusty in side, although I haven't booted it yet. There's no hard drive an…
68kMLA Hardware by mac-man6 Sat, 9 Jan 2010 - 01:06

New Logic Board, missing GPU heat sink — #2

mix some thermal paste with gel super glue it is kinda brittle once dry but it took a hammer to knock it off the last gpu i tried it on (last time I used some silver stuff on a ge…
68kMLA Hardware by Osgeld Fri, 8 Jan 2010 - 21:27

New Logic Board, missing GPU heat sink — #1

I use my pismo extensively. It started shutting off randomly, and I narrowed it down to the logic board by swapping parts with another Pismo. I ordered a new logic board on eBay …
68kMLA Hardware by Dennis Nedry Fri, 8 Jan 2010 - 21:05

1400 keyboard connector pinout? — #10

I'm not sure about more time to work on it, but it will definitely be of good use to fix up a gutted bottom case of a 1400cs that is sitting around with a few extra parts for my pi…
68kMLA Hardware by Trash80toHP_Mini Fri, 8 Jan 2010 - 16:41

1400 keyboard connector pinout? — #9

Yeah, tried resetting the power manager. No help. It has now gotten to the point where it's not worth my time. I'd rather send it off to someone with more time to work on it; or…
68kMLA Hardware by Strimkind Fri, 8 Jan 2010 - 15:33

1400 keyboard connector pinout? — #8

Have you tried resetting the Power Manager? :?: The power-on-off behavior you describe doesn't sound like it's necessarily keyboard related. There's next to nothing that could g…
68kMLA Hardware by Anonymous Freak Fri, 8 Jan 2010 - 05:59

1400 keyboard connector pinout? — #7

Have you tried resetting the Power Manager? :?: The power-on-off behavior you describe doesn't sound like it's necessarily keyboard related. There's next to nothing that could …
68kMLA Hardware by Trash80toHP_Mini Fri, 8 Jan 2010 - 02:51

1400 keyboard connector pinout? — #6

IIRC, the 1400 uses a plastic hook that pushes a switch inside the bottom case to sense lid closure, rather than a magnet and reed. Try poking something non-conductive in the hole…
68kMLA Hardware by Anonymous Freak Thu, 7 Jan 2010 - 18:16

1400 keyboard connector pinout? — #5

IIRC, the 1400 uses a plastic hook that pushes a switch inside the bottom case to sense lid closure, rather than a magnet and reed. Try poking something non-conductive in the hole…
68kMLA Hardware by Bunsen Thu, 7 Jan 2010 - 17:52

Boxed Quadra 605 and 14" Apple CRT! — #12

Well, it was literally just the computer in the box. I was kinda disappointed. Oh well. The new RAM I bought also works in the Quadra. I'll keep a lookout on eBay for an acce…
68kMLA Hardware by Anonymous Freak Thu, 7 Jan 2010 - 14:28

1400 keyboard connector pinout? — #4

Have you looked at the switch that tells the Mac when the lid is closed? That's often a reed switch and magnet. Reed switches have a tendency over time to get "sticky", and your 14…
68kMLA Hardware by Anonymous Freak Thu, 7 Jan 2010 - 07:11

1400 keyboard connector pinout? — #3

Have you looked at the switch that tells the Mac when the lid is closed? That's often a reed switch and magnet. Reed switches have a tendency over time to get "sticky", and your 14…
68kMLA Hardware by H3NRY Thu, 7 Jan 2010 - 05:39
mp.ls