Yes. PC100 and PC133 are 100 percent compatible. The latter will throttle down to 100Mhz speed when mixed with PC100 or 100Mhz bus on the computer. 73s de Phreakout. :rambo:

This is not a standard ATX power supply. This is a custom-form-factor Micro ATX power supply. Click to expand... I thought that might be the case from the size of the box it c…

This is not a standard ATX power supply. This is a custom-form-factor Micro ATX power supply. In the past, Dell was notorious for using non-standard power supplies; sometimes eve…

there was only one indigo version with fire wire it's the 366MH verson I think, but I am not looking to play dvd movies on the computer, I might once in a while but not often. as I…

Will (just about) any low density PC100 or PC133 SODIMM work in a Pismo? I see that in fact is is not hard to find much cheaper ram if you leave "Apple" out of the eBay search. I …

. . . This was something I was looking for back in the days of the IIfPEx Hack . . . . . . which was lost in the storage room disaster. Anyways, if anyone has a DOA …

You need to format the drive in a computer running system 7.x or equivalent. But, popping it in a card-reader on the OS X machine afterwards, gives read- and write access to the …

Once you have a CF card formatted by the SE/30, can you still read the card in MacOS X via a card reader to transfer files? Could the formatting have been done via an emulator in …

Keep in mind that plexiglass is much more subject to scratching and picking up dings than real glass is. Click to expand... I would be more concerned about distortion from the …

These are good prices, but shipping and border duties drive prices up, as does the differential on the dollar. My figure was in $CDN. Am still pondering, but on a certain auction …

well most of my movies are just burned dvd's so it wont not need the decoder, and i think its on the dvd drive, if im not mistaken Click to expand... You are mistaken, I'm afra…

at around $100-125 for 2x512MB chips Click to expand... Try around half that, with a warranty. Heck, get one 512 and a 256, that should be plenty.

I was looking at bare bones LCD panels, and I can find them for around $20 or so for an 800x600 panel. / Plus, an LCD controller was around $100 anyway. Click to expand... Ov…

het it in a few days Woot!!!! its a indgo with fire wire, and also has a matching floppy disk dive, (USB) from what I know there is no air port carrd will make new thread with the…

Hope life doesn't throw too much on your plate mate - do take care, and thanks for all your hard work with this collection of hoodlums over time!

:lol:

I bet Trash80 feels left out... Click to expand... Nope, not a bit! Admin's not my bag, wouldn't know where to begin. I had to pass on Tom's offer over on 'fritter to take over…

Why are we worried about a chunk of green plastic? These machines were built for as many hard drives as their are plugs. The cooling systems on these machines are fine. As long as…

So? He kept the site up and running. He updates phpBB, etc. You don't have to make lots of posts to be the Administrator.

~tl posts infrequently. Look at his profile.

I'm with Wally. I only understood about 10% of what he was talking about, but I'm with Wally.

Page 293 in the normally authoritative source differs with reality. 8-o Two actual SE/30 boards before me have a current limiting device, F1 in the ADB power net. In one inst…

Bump I finally got around to trying this out, but haven't had much success so far. I borrowed an Adaptec 29160N card from a friend, which has a 50-pin connector, and hooked up the…

The IIfx has a 1A fuse between the SWIM chip and the RFI filter, the SE and SE30 do not. There is a 470 Ohm resister in line with the 5VDC line powering the ADB signal line, that …

..."still not totally sure about doing the soldering myself. the current cylindric capacitors are seated in a little piece of black plastic. when removing the old capacitors, does …