The hot coin is the only method I could do right now due to lack of tools. But I just don't think it would be the safest as you would be applying a huge amount of heat immediately …

Nice little trio you got there. Not having owned a IIfx, I think that might be the best machine. Sure the 7600 is more powerful but the IIfx holds a special place in a lot our mem…

Lizard Lick?????????? :?: Click to expand... A street sign about 1.5 miles from the 'intersection' - sorry about the lighting. Sometimes taking pictures with a cell phone s…

a toaster oven with a device controlling the thermal curve would be the best, and closest to the factory, a hot coin is not going to do anything, a can of burning whatver is just g…

Seems the shim method isn't the best. Works for a while then dies. I've been reading plenty of weird and wonderful re-flowing techniques involving heatguns, burning alcohol in met…

the heat gun would work as long as you keep in mind thermal stresses, and dont heat up or cool down anything super quick. Also its going to have to be a fairly stout heat gun, I tr…

I got the 500 to boot off a iMac install CD (my iBook only came with 10.2 install CDs) so it seems in ok shape apart from the hard disk. As for the 800, I read about applying heat…

Testing will follow later, after I blow the dust hippos outta' that FILTHY POS! Click to expand... Did I say dust hippos? Definitely LARGER than THAT! I've NEVER seen such a MASS…

Actually, the Hardware Test CD is booting now on the 500. I got a bit muddled and was actually using the AppleCare TechTool CD instead (it's been a long day :I ) . I think it mig…

Sounds like the 800mhz is a lost cause. Definitely has the logic board graphic chip problem. I would personally concentrate your work on the 500mhz which has what seems to be a m…

Nope, but I'm thinking that I could share the single cable/interface between the $5 NuBus one I got offered. He's also selling extras (whole boxed cards) for $25.

Is it Nubus?

So if you drop a 292 CPU into a PDQ, you get the 83MHz bus and the better video? Or would there be other components in the 66MHz models that choke on the higher bus speed? I gues…

Well, I'm back from behind enemy lines again and I brought back a Blueberry Bundle, another MordorSoft Ergonomic KBD, to complete the pair I need for yet another KBD HackAthon . …

he ostensibly saved the company with such gimmicky computers as the iMac & Cube (?) etc, but those products were YEARS in development, long before the (volatile) steve brou…

Maybe I'll get my screwdrivers out and perform a little surgery

Thanks for the advice, but ... reset that and the PRAM but it's still not working. Now it just boots to a gray screen and nothing else. FWTDM still doesn't work. :?:

It's possible the hard drive is bad, or the volume is bad. Depending on what you're connecting the unit to in target disk mode, if the volume has issues it will not mount or show u…

Try resetting the NVRAM, +opt+o+f and type "reset-nvram" No quotes and then type exit and reboot. Also try resetting PRAM and SMC if it has it.

You must be thinking about the original Wallstreets because the rev 2 models did fit the whole screen in 640x480 and 800x600 modes on the LCD (you were stuck with 1024x768 on the o…

Never hurts to order spares, as they are inexpensive and easily lost. Click to expand... Good point. I'll hold off until I know what's inside but I'll probably order some extra…

Alright, Tom replied. Should I buy one for $35 shipped?

Try writing to Tom Owad, who wrote the article I linked. A few years back he had crates of the things, NIB, which he couldn't get rid of. Rid of which he could not get. Whatever…

I make no guarantees, and this is the advice of an inveterate packrat. Grabbing half a system "just in case" the other half turns up is the precipice of the slippery slope to craz…

I like my B&W's but thats around the time Apple went trendy with form over function. Click to expand... / such gimmicky computers as the iMac & Cube (?) etc, b…