A good vacuum will take out fuzzy bunnies that smell like El Tobacco... but then washing out the case, boards and frame will be needed. Also the mouse and keyboard too.
Well, I do think the Retr0brite is a good idea for the case. Are you going to recap the board or send them off? If you're doing it, wash the logic board at least.
I've never had s…
68kMLAHardwareby TheWhiteFalconSat, 9 May 2015 - 23:29
Yes, you can swap that over no prob. I forget if I did, but I may have done the same from a IIx. With my 030 upgrade, it really did not matter in the end since I had to pull the ch…
@ unity, ok i took the board out and counted it, i have the 132 pins or a 13x13 row setup. I doubled checked and they are soldered through. One thing though, if this originally i…
68kMLAHardwareby newbmac2k12Sat, 9 May 2015 - 05:52
Can I use the replacement power brick for my Dual USB "Snow" iBook G3 (700MHz I think, from GainSaver) for the PowerBook, or must I buy a replacement 1400c(s) power supply from eBa…
I have the Apple 600i CD reader and 2 CD Burners (one from Ricoh and the other from who knows...) all can read 700mb media and the burners can burn 700MB. It's just that last coupl…
Hmm... I'll have to see what it says on the door when I get it. I don't mind using CD-Rs for now. It would be nice to have CD-RW capability though. Edit: In the eBay picture, the C…
CD-ROM Readers have a difficult time reading CD-RW Disks, but a CD-ROM Writers can read them easily if the support the CDRW+ format. Not all older CD Writers have CDRW+. If it does…
OK, I'll pay the extra US$30 to get the floppy module. My PowerBook 1400cs/166 has the CD module already in it.
I'll also get a HDI-30 to 25-pin SCSI adaptor so I can
Use SCSI D…
yup i sifted through the bull, and found this post, as trag mentioned they have got to it first.
the issue looks most likely caps. and it looks like they can (with this psu) be …
OVERVIEW
A limited number of Macintosh II CPUs were manufactured with an HMMU-unique
socket that does not allow the CPU to function properly if a PMMU upgrade is
installed. Custom…
I said that up top. Recalled because of a socket issue. The four chips to the lower right, see those? The black upper right one comes in versions that have different pin layouts un…
just an update havent had too much time to look into the power supply further. But one thing, i did stumble across a site called atxg4. He has adapters to use atx ps in g4's. He …
68kMLAHardwareby newbmac2k12Fri, 8 May 2015 - 06:28
to uniserver, the board in the top pic is the one i am currently working on, its the working one. On the other mac II i have the board pictured on the bottom. One thing though, i…
68kMLAHardwareby newbmac2k12Fri, 8 May 2015 - 06:21
If you can get both yes.
I have a 2GB CF in a PCMCIA Adapter which I copied the System 7.6.1 on my 5300ce as a back up drive, and tried it on my 1400/133 & 166. They both …
unity said:
I could be wrong. I just have never seen a model like M0001EP or M0001AP, etc. I could put them into the list proper, but that would add a few lines for sure!
…