I'm going to put Mac os 9.2.2 and then 10.2.8.
I really don't want to use xpostfacto, too much of a pain.
I'll be happy with the G4 and 10.2.8.
with the G4 it should be a little…
68kMLAHardwareby MacManiac1701AFri, 14 Aug 2009 - 23:25
ok, I have started the operation. I took everything I might need out of the 180. I forgot on the 1xx powerbooks, the CPU is on a daughterboard, so I only removed that. The 180 had …
68kMLAHardwareby iamdigitalmanFri, 14 Aug 2009 - 21:55
I remember reading Leopard would be capable on a B&W with a G4 upgrade. Do you think you could get Leopard on an AIO with a G4 upgrade?
Just sayin'.
Click to expand...
…
68kMLAHardwareby Mike RichardsonFri, 14 Aug 2009 - 21:28
I remember reading Leopard would be capable on a B&W with a G4 upgrade. Do you think you could get Leopard on an AIO with a G4 upgrade?
Just sayin'.
68kMLAHardwareby ChristopherFri, 14 Aug 2009 - 21:17
If it wasn't for the shipping I'd be all over this
Click to expand...
I presume you'd be all over it, to do a CC mod with a mini or some such, rather than using a significantly…
ifixit.com should have it.
Is there any real difference in the 180 logic board vs the 165?
Click to expand...
I don't think ifixit goes back that far
As far as motherboard …
68kMLAHardwareby iamdigitalmanFri, 14 Aug 2009 - 21:00
Cool!! I just ordered a ZIF G4... I didn't need the jumpers as I already have it set for 400mhz with the G3 upgrade that I put in, I WAS looking on ebay for a G4 Ziff b4 I bought t…
68kMLAHardwareby Mike RichardsonFri, 14 Aug 2009 - 20:27
Cool!! I just ordered a ZIF G4... I didn't need the jumpers as I already have it set for 400mhz with the G3 upgrade that I put in, I WAS looking on ebay for a G4 Ziff b4 I bought t…
68kMLAHardwareby MacManiac1701AFri, 14 Aug 2009 - 20:26
Sounds like you still did something wrong.
Grab a matching group of 4 30-pin SIMMS. That means they have to be the SAME.
Put them in slots 1-4, nowhere else and carefully install…
OK Good news and bad news. After removing the RAM that was put in there randomly it CHIMES!
And Half a second later, it does the death chime... on BOTH of them!!! xx( 8-o
Any…
Don't know if this is cheap, but . . .
http://www.adoptamac.com/product_info.php?cPath=31&products_id=120
He got a book to me very quickly, but he's had to turn off the…
68kMLAHardwareby Mike RichardsonFri, 14 Aug 2009 - 17:01
Tried the Mac Driver Museum?
Click to expand...
Indeed I have - they have some eMachines and Supermac video drivers, but for other products other than the SimplyTV
68kMLAHardwareby phreakindeeFri, 14 Aug 2009 - 12:57
Don't know if this is cheap, but . . .
http://www.adoptamac.com/product_info.php?cPath=31&products_id=120
He got a book to me very quickly, but he's had to turn off th…
68kMLAHardwareby Trash80toHP_MiniFri, 14 Aug 2009 - 12:04
Coxy: the speakers and amp as-is are only compatible with the USB outs on certain Macs, contemporary to the Cube and Digital Audio G4 (the DA designation in fact ~only~ means that…
Do NOT replace them with radial caps. Although this might look like the easiest solution, they are nowhere near as reliable as tantalum capacitors. Contact trag on the forums to bu…
Welcome to the Cube club Bunsen! Mine is my primary Mac and I still think it's got a few good years left in it. Regarding suitable video cards, the Apple Radeon 7500 is a nice ch…
Thanks for hte info - something to try. The audio capacitors are the ones right before the pds slot hole, right? You wouldn't happen to know the uF ratings and voltages so I coul…
68kMLAHardwareby lopaka1998Fri, 14 Aug 2009 - 05:35
What does the amplifier for the ball speakers take? I've got a "pair of balls" from my old iMac G4; it would be good if there were amplifiers available to use them with other devic…