As wonderful as this forum is, I find that the badcaps forum has beaten us to the punch regarding MDD power supply repair. Try this thread as a guide to other useful threads:  htt…

Found a Pic:

360alaska said: There's also some that come with a small board that adds the jumper... Click to expand... I've seen that too, but have not been able to find a link for it…

On the Mac Plus, I find something odd. The Plus was introduced in '86 but got the silver/grey case in '87 but the Plus was in production for 5 years. So according to this, there s…

Elfen said: I believe that the Platinum 512Ke and Plus came about after time as the SE, probably because they run out of one plastic and used the other. Funny, the board Cum…

I believe that the Platinum 512Ke and Plus came about after time as the SE, probably because they run out of one plastic and used the other. Funny, the board CumpuNerd sold me to …

that's more than I have in my collection unity! - haha - allot are variations of the same model I know...but man there allot of them - No macintosh Portable.........its the sam…

newbmac2k12 said: Since i dont have a mac monitor im using a lcd flat screen with the mac to vga adapter by belkin.  No video, so I thought maybe the video card so i used ano…

Just because the adapter works on the 6100 does not mean it will work on the II. FYI - The one with tat caps is probably the older. Look at the revisions. The first batch did not …

Well just information there are radial caps that fail on the video cards so recapping may fix if setting the adapter does not work. I would also recap motherboard while at it.

i did notice some super glue built up on some spots as if there was some wires glued etc… oh well i just left the residue, its not hurting antyhing. I've seen worse, a guy from ca…

classic II is about 60 to 65% ( working from only a re-cap ), and this board here had some pads torn clean off. what ever you are re-capping. if works except for faint sound… seem…

Like I said again and again, recapping a Classic II seems to bring back 90% - 95% of them from the Shimisa Screen Grave! So in you recapping the board, fixed what that guy could no…

Uni certainly is the guy to tell someone how their soldering job is! Appreciate it very much! Just a note: The CII wasn't mine, someone else had tried to fix it but I never really…

yup i got a SE/30 and a Classic II from compunerd, i can tell that he very much progressed in his soldering once he got to the se/30. got the Classic II going, was pretty interest…

Appreciate it! Thanks!

good news Elfen...........its always worth the effort in the end - hope she lives for a long time

unity said: Odd. So basically you have to machines on two displays that do not work - if I am distilling this right. I mean you tried to displays, two main boards, two video…

Yes

Thank you for your reply. So, I'll try to use the old original 603 ev processor card I got in the 8600, boot the system, then load the software of Maxpowr G3 an then re install th…

Go slowly. Install some known working RAM. Remove all PCI cards other than video. Reset CUDA. Go for a walk and make a cup of tea. And clean the plugs on the PSU, test them for…

Nice! Glad it helped!

Is the RAM installed the right configuration - and have you done a CUDA reset (just press the button for a second)

Thanks for the tip ScutBoy! I just had to turn the middle one a little bit and the image is stable! See the video: http://youtu.be/8zKdirmhL4c

Odd. So basically you have to machines on two displays that do not work - if I am distilling this right. I mean you tried to displays, two main boards, two video cards. Right? And…