Hmmm... I have plenty of keychains... er... memory laying around. Maybe my LC III could use some of that extra "memory" :lol:

Ahh, you might want to check the date of that article, because...well...obviously it doesn't.

Okay. I've checked the AC power cord and I'm getting power from the wall. About 120.2VAC. So I will rule that part out. I've went ahead and pulled the power supply unit and the…

Ladies and Gentleman: For those in need of recapping your SE/30 logic boards due to Simasimac symptoms, I can still commit myself to doing the work. Unfortunately, due to a sudde…

Ortencia, You'll need to open up the case and remove the "mobo", aka Logic Board in Apple Computer terms. This is the circuit board on the very bottom of the SE/30. Once the log…

Thanks for replying back about that. I figured as much. But no doubt someone out there has stock of them. I cannot imagine that NASA and the US Military would have snapped them …

The best SSD for the SE/30 is a drive that is made in the stock form factor (3.5") and already has a 50-pin SCSI connector. Indeed, one probably couldn't do much better than this:…

If you can't find a schematic following the traces and using a continuity tester should reveal the location of the fuse.

My pismo was a 500MHz unit with 1mb of L2 cache and 512mb of memory and I noticed fairly acceptable performance under both Panther and Tiger. The difference is minimal, and I tende…

thanks. i found the site again; it tells of a IIfx in a similiar situation. different motherboards obviously. shouldn't i be able to find this out with a copy of the schematics of …

yep that was it i didn't see it until i saw a picture will this one work http://www.allelectronics.com/make-a-store/item/RMF-224/0.22-UF-250-VOLT-POLYESTER-FILM-CAPACITOR/-/1.htm…

Yeah. I'm still curious as to why give up Admin status... Not able to afford the time anymore to keep the forums up and running? Thanks for keeping this wonderful site up and run…

Mobo = Motherboard (otherwise known as the main logic board). The ADB Fuse is located on the motherboard...I'm unaware of the exact location, or how easy it is to replace - we have…

On behalf of the entire board, thanks for administering the forum over the past few years. Your dedication to the forum, especially in light of the server failures we've had, was m…

what do you mean "mobo?"

yep that was it i didn't see it until i saw a picture will this one work http://www.allelectronics.com/make-a-store/item/RMF-224/0.22-UF-250-VOLT-POLYESTER-FILM-CAPACITOR/-/1.htm…

No it's the mobo.

Actually, its liquid nitrogen you need, and unfortunately the 1 Ghz speedup only works with the Plus, not the SE. [)] ]'> http://homepage.mac.com/schrier/plus.html Click t…

Even though yours didn't explode, it's likely the power filter capacitor that released its magic smoke. have a read through this: Apple ///: burned Power Supply and this: Apple…

Macintosh SE Speaker (this needs to be attached somewhere in the Plus case) ... Of course the issue with copper is its conductivity, it may not be the best option to have running a…

I've read this is a fuse. Can't remember where I saw that. Can anyone tell me where this fuse is, and how to change it ?

well my apple /// was working and it started to smoke and once the smoke cleared it quit working i pulled the power supply out of the case and i couldn't see any blown parts what …

There wasn't a topic about this because, honestly, it's not that big a deal. I've got other things on my plate, so I've decided to step back from being an admin here. Dana (mania) …

The LC, LC II, LC III, and their Performa equivalents are all interchangeable. However, the connectors are in different places on the logic board, between the LC and the LC III (no…

I've been toying with the kind of looks that can be achieved with Black, Clear (Glass or Plexi) and Copper. I've seen some spectacular results that look really nothing short of cla…