Lets go back to the very beginning...
You got... A CF in a PCMCIA adapter that crashed a 3400 and gives problems on a 5300? It gave a Sad Mac on the 3400 and then bars on boot wh…
The floppy drive has been very well tested and works perfectly. The disk also works perfectly.
I was going to say the SCSI enclosure didn't work but it appears to be booting to O…
Elfen said:
I think you can turn the unit on as a SCSI Drive and connect it to another Mac through the SCSI Port and inspect the drive like modern Macs can connect by FireWir…
68kMLATroubleshootingby mac-cellarMon, 30 Mar 2015 - 22:26
bigmessowires said:
A commenter on my blog also pointed out this homebrew adapter based on an Altera DE0-Nano. It's got a very nicely detailed write-up of how it works. https…
68kMLATroubleshootingby NJRoadfanMon, 30 Mar 2015 - 20:50
raoulduke said:
It doesn't seem to be able to boot from floppy. It starts to boot normally and then on the smiling mac it spits out the floppy and goes back to the flashing …
68kMLATroubleshootingby ElfenMon, 30 Mar 2015 - 18:03
I really like that adapter. If you decide to make any, BMOW, let me know. I'd love to buy one or two. Replacing an aging CRT with an LCD for my Apple IIs would be pretty handy. …
68kMLATroubleshootingby olePigeonMon, 30 Mar 2015 - 17:35
Gorgonops said:
For authenticity (I guess) those scalers render the border area in their output, and what that ends up translating to is on, say, a 1280 pixel wide LCD displa…
68kMLATroubleshootingby bigmessowiresMon, 30 Mar 2015 - 17:35
I mentioned earlier in the thread that I've been using one of those "CGA to VGA" boards on my IIgs setup. (And I'm forced to be pedantic here: those boards *are not actually "CGA";…
68kMLATroubleshootingby GorgonopsMon, 30 Mar 2015 - 17:10
Perhpaps its scaler is better, but my monitor won't accept 15 kHz RGB, so it can only use composite video. I'm guessing 15 kHz RGB converted to VGA with one of these CGA adapters w…
68kMLATroubleshootingby bigmessowiresMon, 30 Mar 2015 - 06:45
Yes, that unit will work, but the quality is likely "eh", "meh", or non-existent. The GBS-8220 board that likely came out of the same factory in China is commonly found for $30 or …
68kMLATroubleshootingby NJRoadfanSun, 29 Mar 2015 - 18:24
On the topic of IIgs RGB video output - does anyone know if it's the same as CGA video, found on old PC graphics cards? CGA is also described as a 15 kHz video signal with analog R…
68kMLATroubleshootingby bigmessowiresSun, 29 Mar 2015 - 16:49
It actually gets worse. I replaced the HD and hooked it up to a SCSI enclosure that has electrical outlets on the back of it (which I say to distinguish this first part where the …
68kMLATroubleshootingby raouldukeFri, 27 Mar 2015 - 23:50
Sorry for posting so late.
The SD needs a minimum of 3.3V, as per Raspberry Pi's use of 3.3Vs instead of 5V. Question is, what kind of adapter do you have?
At worst, I think, you…
68kMLATroubleshootingby ElfenFri, 27 Mar 2015 - 23:16
Elfen, I was planning on going through your steps tonight or tomorrow but I have a concern - on the Kanga my PCMCIA - SD converter freezes every time I insert it (pretty similarly …
68kMLATroubleshootingby raouldukeFri, 27 Mar 2015 - 21:10
Or, for most of what Apple II Pi does you could just transfer your physical Apple II disks into images using ADTPro and run them on the same GSport emulator it uses for its Apple ]…
68kMLATroubleshootingby GorgonopsThu, 26 Mar 2015 - 19:37
What is the Apple II Pi?
FAQ
Is the Raspberry Pi talking directly to the Apple II peripherals?
No, the Apple II is running a custom driver that reads input from the keybo…
68kMLATroubleshootingby BunsenThu, 26 Mar 2015 - 11:53
You can use Apple ][ Server or ADT over the serial port. I'll try and dig up a link. It's a way of having an Apple II Pi without the out-of-production slot adapter board, which o…
68kMLATroubleshootingby BunsenThu, 26 Mar 2015 - 11:35
markyb86 said:
I hate suggesting to go out and buy something for projects, but if you can come across one of these
Click to expand...
I've been carrying around one of tho…
68kMLATroubleshootingby GorgonopsWed, 25 Mar 2015 - 16:30
Also check that the plastic post that should engage those switches isn't broken off on the back panel or front panel. If the machine gets jostled around in shipping, etc. they very…
68kMLATroubleshootingby ScutBoyWed, 25 Mar 2015 - 13:32
bigmessowires said:
So.... where were we? I think I need to go play some Choplifter.
Click to expand...
That's actually a solution to many of life's problems
68kMLATroubleshootingby ScutBoyWed, 25 Mar 2015 - 13:25
bigmessowires said:
Why doesn't ADTPro work this way?
Click to expand...
Because ADTPro is intended to work both ways... both creating and extracting disks. Not just pla…
68kMLATroubleshootingby david__schmidtWed, 25 Mar 2015 - 11:57
Hmm, that USB sound card sure is cheap! I have no idea how they can make any money selling stuff like that for $3.
I just noticed that Apple ][ Disk Server does something very sim…
68kMLATroubleshootingby bigmessowiresWed, 25 Mar 2015 - 05:22