Elfen, I was planning on going through your steps tonight or tomorrow but I have a concern - on the Kanga my PCMCIA - SD converter freezes every time I insert it (pretty similarly …

Or, for most of what Apple II Pi does you could just transfer your physical Apple II disks into images using ADTPro and run them on the same GSport emulator it uses for its Apple ]…

What is the Apple II Pi?   FAQ   Is the Raspberry Pi talking directly to the Apple II peripherals?   No, the Apple II is running a custom driver that reads input from the keybo…

You can use Apple ][ Server or ADT over the serial port.  I'll try and dig up a link.  It's a way of having an Apple II Pi without the out-of-production slot adapter board, which o…

heck the floppy emu is so advanced he could make it emulate a whole Iic i bet. just add keyboard...

I'm excited for this. My FloppyEmu will go great with my //c

markyb86 said: I hate suggesting to go out and buy something for projects, but if you can come across one of these Click to expand... I've been carrying around one of tho…

Also check that the plastic post that should engage those switches isn't broken off on the back panel or front panel. If the machine gets jostled around in shipping, etc. they very…

bigmessowires said: So.... where were we? I think I need to go play some Choplifter.  Click to expand... That's actually a solution to many of life's problems

bigmessowires said: Why doesn't ADTPro work this way? Click to expand... Because ADTPro is intended to work both ways... both creating and extracting disks.  Not just pla…

Hmm, that USB sound card sure is cheap! I have no idea how they can make any money selling stuff like that for $3. I just noticed that Apple ][ Disk Server does something very sim…

I did not see that one! Thanks Snuci

I hate suggesting to go out and buy something for projects, but if you can come across one of these { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox…

Thanks for the offer! I think I won't need it, though: after much fussing and fiddling, I finally have a working IIgs serial cable for ADTPro *and* a working Lisa serial cable for …

(Good info on the trackpad/palmrest being replaceable, by the way.  The keyboard, as far as I can tell, is also replaceable (swapped it out last night).  The keyboard that came wit…

It's an evil thing to suggest, but does your IIgs' motherboard have the header soldered for a IIe keyboard? Since your IIe is already damaged you could use that as the excuse to cu…

bigmessowires said: Ah, I guess you're right about audio. But won't I need the SSC anyway, unless I continue using the IIgs as a go-between disk making station for the IIe? …

The IIgs certainly brings its share of conveniences, even as an 8-bit machine. Plenty of folks used them as well equipped "fast" Apple IIes back in the day.

david__schmidt said: This is better than spending $20+ on a super serial card for your IIe. Click to expand... Ah, I guess you're right about audio. But won't I need the …

You do have a case of "you can't get there from here," don't you?   You will be unhappy with audio even if/when you get it working.  Yes, it's a line-in vs. mic amplification iss…

I've run into a snag with ADTPro. Using the audio out from my PC, I was able to successfully bootstrap the IIe and load the ADTPro client. But to actually transfer any disk images …

The board inside the speaker panel, not the inverter. The battery shouldn't make a difference. If anything you should test the symptoms just on AC adapter and just on battery. …

Right, ADTPro bootstraps and ships on ProDOS 1.9 for this very reason.

The switch is highlighted in red.  You can also jam a q-tip or cotton swab in there (that's what I use) (Image was originally from Digibarn but I cropped it to zero in on the ar…

yeah the hinges have been reinforced by two metal pieces on the kanga, so the two plastic pieces that cover the hinges must cover a bigger volume compare to the 3400c. Must have be…