Or just throw it out the window...

Likely the firmware and OS X doesn't support the GPU. Just give up on upgrades. Nothing will be supported, it'll reduce the value of being original, and these weren't meant to be …

The machine could have one of those gimped PCIe slots that only take SVDO ADD2 cards. Otherwise being BIOS based it should take standard PC video cards.

Are you trying PC graphics cards or Mac?

TylerEss said: There are PDS Ethernet cards for the Mac SE, though of course they'll be getting harder to find as time goes by. That feature where ebay emails you might be us…

yah sometimes the sad mac codes can send you on a wild goose chase.  is best to just replace it all.

I have been testing all my favourite games on the Plus to make sure they work, however I am having issues with Pax Imperia.  I can start it and choose the star system but can't get…

A SCSI to Ethernet from Asante will work also it's external.

Here's one new in the box but it's pretty expensive: http://www.ebay.com/itm/NOS-NEW-DAYNA-DAYNAPORT-E-SE-T-MACINTOSH-SE-10BASE-T-ETHERNET-NETWORK-PRODUCTS-/111540094192?pt=LH_Def…

I found half of one: http://www.ebay.com/itm/Vintage-Mac-SE-MacCon-SEE-Asante-Tech-P-N-09-00300-61-Rev-A-Apple-/400643429539?pt=LH_DefaultDomain_0&hash=item5d483594a3 This…

There are PDS Ethernet cards for the Mac SE, though of course they'll be getting harder to find as time goes by. That feature where ebay emails you might be useful. There were als…

It was for both of them However it was aimed as a "if replacing all the ram fails" solution yes there are 2, iirc they are the two chips immediately to the right of the CPU (as…

There are 3 main revisions of the Lisa Hardware, the original with the twiggy drives (Lisa 1), the updated version with one Sony drive (Lisa 2) that is otherwise the same as a Lisa…

I wouldn't attempt any upgrades to it besides possibly a SCSI card and maxing the ram out. It would however be nice if you could dump the BIOS and store it somewhere for safekeepi…

I need to find photos, if I have any, of my sold Mac XL. I am starting to think it had that spare cable too now. But its been so long.

The sticker on the case says A6S0300P  Thats why I call it a Macintosh XL. See: http://en.wikipedia.org/wiki/Compact_Macintosh I find it complicated these names.....

The 220V-240V, 50Hz, .7A PS would be correct for Lisa's in Europe, it's nothing special.  Later Lisa 2/10 (XL) units with the widget drive used a 1.8A PS that was internally 120V-6…

I second what uni said, be assured after decades these caps are going bad, even the best caps will dry out and not do the job.

Hi,  Many news : i can't boot on a USB drive (no option on the BIOS) and can't use a real graphic card : i have tested with many GPU and i have no screen. Just photos.

I think maxes suggestion was more for Macdrone not really for The thread op

Just tossing this out there, I'd say that I have re-Ram'd at least 14 128k's. and every single one of them had artifacts on the screen and A sad Mac. and every single one of them, …

As I told here before my other Lisa has also the "strange unused power connector". See below. It say on the casing also that it is a A6S0300P There is also the PSU I can't find…

max1zzz said: did you replace both 74s244's or just one? Click to expand... just one i replaced. which was near the cpu. i have to replace one more ? thanks for readin…

Thanks for all the suggestions! I think I'm going to have a look at it this friday, I'll keep you updated with my findings!

did you replace both 74s244's or just one?